What you see on the LCD
Memory Full
Memory Over Flow
No Command
No Doc. Stored
No Number
No Passcode
No PIN Number
No Report
Please Wait
What it means/What to do
You tried to scan the document into the memory but the machine doesn’t have enough available memory to complete the operation.
If the fax received documents in the memory, print them to clear space.
During transmission (or copying), you entered more pages into memory than your fax could store. Press START (or COPY) to tell your fax to keep as many pages in memory as possible, or press CANCEL to delete from memory all pages stored during this operation (but not previous operations).
You pressed REVIEW COMMANDS to review upcom- ing commands, but your fax machine doesn’t have any stored.
You tried to print a document from memory, but your fax machine doesn’t have any stored.
You selected an autodialer number that doesn’t have a number assigned to it.
Either choose another autodialer number or dial a phone number directly from the numeric key- pad.
You tried to protect an operation but there isn’t protection passcode stored in your fax machine. Store a protection passcode in your machine, then try protecting the operation again.
You selected “Mode1” in the PIN mask feature and tried to use an autodialer number in which no PIN has been entered.
Enter a PIN for that number, then try again.
You requested an activity journal or confirma- tion report, but your machine has no record that any fax jobs have occurred.
You tried to either transmit, copy or print the document while the
Your machine’s thermal print head becomes very hot.
Please wait a moment until the head cools down.
What you see on the LCD
Polling In Use
Printer In Use
Protect Doc Stor
Remove Paper
Reset Document
Scanner In Use
Sub-Addr. In Use
Too Many Digits
Too Many Loc.
Just in case …
What it means/What to do
You tried to store a polling document in your fax, where one has already been stored. Wait for the fax to complete the polling opera- tion, then try again.
The command you entered requires the use of the printer, which is already in use. Wait for the fax to finish printing, then try again.
A received document was in your fax’s memory when you tried to turn off security reception or erase the protection passcode.
Print the received document from your fax’s memory, then try the desired operation again.
A paper jam has occurred.
Remove the jammed paper (review pages
Your document was not inserted correctly, or the fax to which you are sending cannot handle the document’s page length.
Reset the page and try again.
The command you are entering requires the use of the scanner, which is already in use. Wait for the fax to complete the scan, then try again.
You entered a
Enter a different number for your F-code box’s subaddress.
You attempted to enter too many numbers or characters for the current operation.
Press CANCEL to delete the extra characters, then try again. You may want to review the opera- tion’s instructions.What you see on the LCD What it means/What to do
You tried to enter too many group numbers for a relay broadcast initiation. You can enter up to 10 group numbers.
Press CANCEL to delete the extra group numbers and try again.
3.5
