Factory Reset, Standing Pilot Toggle | Pitco Frialator L22-355

Spin Fryer I12 Cooking Computer

Pitco P/N 60149505

4.8.7Factory Reset

Factory Reset provides a quick way to erase all setup changes and restore control to factory settings.

Warning: Any settings made prior to a factory reset will be lost. This includes customer specific downloads performed at Pitco Frialator. Heat profile after a reset is Generic 1 for gas appliances.

With the display showing	, press 8 product key. After a few
moments, the display will show [ P ]. Press the	display will return to
.

4.8.8Standing Pilot Toggle

8

For some applications, it is desirable to maintain the gas pilot flame when the appliance is OFF. Heat from the pilot keeps solid shortening in the liquid state for quicker warm-ups in the morning. Default setting for standing pilot is off.

Note: Heat Demand Profile (section 4.8.3) must be set to Generic 1, or T-stat. Standing Pilot toggle has no effect in with any other setting.

With the display showing

, press product key 9. Display will

show [STANDING] [PILOT n], where “n” is ON or OFF. Use product key [0] change value, then

press the

to save choice. Display returns to

.

4.8.9Set Network Address

With the display showing

, press key R.

Display will show [ADDR aa], where “aa” is a current address (default is 31) for this control. When controls are connected together for data collection, all controls must have different addresses for cooking computers that are tied together with the RS-485 communications port.

To change this value, use the product keys for numeric entry of a new value.

 Press the

key. Display returns to

.

R

4.9To Exit Programming Level 3

With display showing

, press the key.

Display will show . Continue with changes in sections 2 or 3, or continue exit with

the next step. To return to normal operations, press the key again.

L22-355 Rev 1

Page 18 of 28

Image 18

Pitco Frialator L22-355 service manual Factory Reset, Standing Pilot Toggle, Set Network Address, To Exit Programming Level

Contents

For Pitco P/N 60149505 Spin Fryer Important Information for Future Reference To Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To turn the appliance on To turn the appliance OFFTo start a cook To cancel a cook To check Actual and Set temperatures To perform a Boil Out operation Automatic Boil Entry Water DetectionManual Boil Entry To Set Cook Temperature To Enter Programming Level 1 for the Store Manager Cook Time Shake TimeHold Time Spin Rate Hold Pre-AlarmSpin Time To Exit Level 1 programming Password Change or Required? To Change Options Level 2 for the Store ManagerFahrenheit or Celsius Display Beeper ON/OFF Language SelectionMelt Cycle Type Recovery Test Value Offset the Temperature Display To Enter Programming Level 3 for the TechnicianMelt Cycle on Time Recovery Times Minimum on and OFF Cycle Time Diagnostic Menu Entry Function Description Button Ready Level Temperature Operating RangeMore Service Menu Entry Instant On Toggle Cancel Duration Shake Alarm DurationHold Alarm Duration Configuration Value Set Network Address Factory ResetStanding Pilot Toggle To Exit Programming Level Offset Temperature Display Factory Menu Level 4 for the TechnicianPitco Collect toggle Recovery Test Values Operating Temperature RangeHigh Limit Value Spin Diagnostics Used if object becomes stuck during spinning 12.1 Control ID Display Test On/OffMore Factory Menu Entry To Exit Factory Menu Level Other Displays System / FailurePage Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type Nominal Ohms Probe Resistance ChartProbe Resistance in 5F Increments Probe Resistance Mailing Address P.O. BOX 501, CONCORD, NH