Manuals / Pitco Frialator / Kitchen Appliance / Fryer

Pitco Frialator L22-355 service manual Beeper ON/OFF, Language Selection, Melt Cycle Type

Models: L22-355

1 28

Download 28 pages 37.69 Kb

Page 11

		Spin Fryer I12 Cooking Computer
3.3	Beeper ON/OFF:	Pitco P/N 60149505
3.3	Beeper ON/OFF:
With display showing		, press the product key [0].
	Display will show	. Press product key 3, display shows
	[BEEPER][	ON].

3

Use the product key [0] to toggle ON of OFF.

Press key to save choice. Display shows .

3.4Language Selection:

With display showing	, press the product key [0].
 Display will show	.

Press product key 4, display shows [ENGLISH] [LANGUAGE].

4

Use the product key [0] to scroll through choices (ENGLISH, ESPANOL, FRANCAIS, DEUTSCH, HOLLAND).

Press key to save choice. Display shows .

3.5Melt Cycle Type:

This adjustment allows selection of the melt cycle type and requirement when starting the appliance from a cold start.

With display showing	, press the product key [0].
 Display will show	.

Press product key 5, display shows [LIQUID], the default setting.

Use the product key [0] to scroll through choices (liquid, solid, or, no melt).

Press key to save choice. Display will again return to .

5

Page 11 of 28

L22-355 Rev 1

Image 11

Pitco Frialator L22-355 service manual Beeper ON/OFF, Language Selection, Melt Cycle Type

Contents

Important Information for Future Reference For Pitco P/N 60149505 Spin FryerTo Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To start a cook To turn the appliance onTo turn the appliance OFF To check Actual and Set temperatures To cancel a cookManual Boil Entry To perform a Boil Out operationAutomatic Boil Entry Water Detection To Enter Programming Level 1 for the Store Manager To Set Cook TemperatureHold Time Cook TimeShake Time To Exit Level 1 programming Hold Pre-AlarmSpin Time Spin RateFahrenheit or Celsius Display Password Change or Required?To Change Options Level 2 for the Store Manager Melt Cycle Type Beeper ON/OFFLanguage Selection Recovery Test Value Melt Cycle on Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Minimum on and OFF Cycle Time Recovery TimesFunction Description Button Diagnostic Menu EntryInstant On Toggle Temperature Operating RangeMore Service Menu Entry Ready LevelConfiguration Value Shake Alarm DurationHold Alarm Duration Cancel DurationTo Exit Programming Level Factory ResetStanding Pilot Toggle Set Network AddressPitco Collect toggle Offset Temperature DisplayFactory Menu Level 4 for the Technician High Limit Value Recovery Test ValuesOperating Temperature Range Used if object becomes stuck during spinning Spin DiagnosticsTo Exit Factory Menu Level Test On/OffMore Factory Menu Entry 12.1 Control ID DisplaySystem / Failure Other DisplaysPage Mechanical Dimensions J1Left Inputs Type Nominal Electrical Connections at Left and Right connectorsProbe Resistance Probe Resistance ChartProbe Resistance in 5F Increments OhmsMailing Address P.O. BOX 501, CONCORD, NH