Pitco Frialator L22-355 service manual Test On/Off, More Factory Menu Entry, Control ID Display

Spin Fryer I12 Cooking Computer

Pitco P/N 60149505

5.11Test On/Off

With display showing	press product key 0.	0
Display shows [TEST xx], where “xx” is ON or OFF. If ON is selected, temperatures
displayed by the controller are probe tip temperatures unaltered by values set in
section 4.1, or 5.1. For normal operations, this setting should remain OFF.

To change this value, use product key 0 to toggle choice (ON or OFF).

Press the key. Display now shows .

5.12More Factory Menu Entry

With display showing		press product key R.	R
Display shows		.
5.12.1	Control ID Display
	From the	display, press the [0] key.
	Display will show [CONTROL ] [60149505], the Pitco part number, 60149505.
	Press the [0] key again.
	Display will show [S/W	] [0149501x], this is Pitco’s software number and current
	revision letter.

Press the [0] key again.

Display will show [CHECKSUM] [00Fxxxxx], the software check sum of the loaded software.

 Press the [0] key again to repeat these items, or, press to return to

.

5.12.2 Set Network Address

This menu is identical to Set Network Address section 4.8.9 except is

displayed instead of [SERVICE].

0

R

5.13To Exit Factory Menu (Level 4):

To exit Factory Programming, Press the key. Display will show . Continue with settings in section 2 or 3, or exit in the next step.

To return to normal operations, press the key again.

 Display shows

;

, or

.

L22-355 Rev 1 Page 22 of 28