Minimum on and OFF Cycle Time | Pitco Frialator L22-355 guide

Spin Fryer I12 Cooking Computer

Pitco P/N 60149505

4.3Minimum ON and OFF Cycle Time

With display showing

press product key 3.

Display shows [MIN ON:nn] [MIN ON], where “nn” is the value, in seconds, of time for minimum heat pulse period.

To change this value, use the product keys for numeric entry of a new value, then

press the key to save.

Display shows [MIN OFF:nn] [MIN OFF], where “nn” is the value, in seconds, of time for minimum heat off period. Use the product keys for numeric entry of a new value.

 Press the

key. Display now shows

.

4.4Recovery Times:

This controller maintains a record of heat up times for the appliance. A poorly running appliance will have increased recovery times stored in this display. There is no selection done here, just the display of recovery time values.

With display showing , press the product key [0].

 Display will show

.

Press product key 6; display will show [RECOVERY] [TEST].

Press the product key [0]. Display will show [FnnnLyyy], where nnn is the factory recovery value, and yyy is the last warm- up recovery value.

 After recording these values, press the key. Display will again return to

.

3

4

L22-355 Rev 1

Page 14 of 28

Image 14

Pitco Frialator L22-355 service manual Minimum on and OFF Cycle Time, Recovery Times

Contents

For Pitco P/N 60149505 Spin Fryer Important Information for Future Reference To Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To start a cook To turn the appliance onTo turn the appliance OFF To cancel a cook To check Actual and Set temperatures Manual Boil Entry To perform a Boil Out operationAutomatic Boil Entry Water Detection To Set Cook Temperature To Enter Programming Level 1 for the Store Manager Hold Time Cook TimeShake Time Spin Rate Hold Pre-AlarmSpin Time To Exit Level 1 programming Fahrenheit or Celsius Display Password Change or Required?To Change Options Level 2 for the Store Manager Melt Cycle Type Beeper ON/OFFLanguage Selection Recovery Test Value Melt Cycle on Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Recovery Times Minimum on and OFF Cycle Time Diagnostic Menu Entry Function Description Button Ready Level Temperature Operating RangeMore Service Menu Entry Instant On Toggle Cancel Duration Shake Alarm DurationHold Alarm Duration Configuration Value Set Network Address Factory ResetStanding Pilot Toggle To Exit Programming Level Pitco Collect toggle Offset Temperature DisplayFactory Menu Level 4 for the Technician High Limit Value Recovery Test ValuesOperating Temperature Range Spin Diagnostics Used if object becomes stuck during spinning 12.1 Control ID Display Test On/OffMore Factory Menu Entry To Exit Factory Menu Level Other Displays System / FailurePage Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type Nominal Ohms Probe Resistance ChartProbe Resistance in 5F Increments Probe Resistance Mailing Address P.O. BOX 501, CONCORD, NH