Pitco Frialator L22-355 service manual To Enter Programming Level 1 for the Store Manager

Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
Table of Contents:
1 Key Locations and Functions:	4

1.1To turn the appliance ON: _______________________________________________________ 4

1.2To turn the appliance OFF:_______________________________________________________ 4

1.3To start a cook:________________________________________________________________ 4

1.4To cancel a cook: ______________________________________________________________ 5

1.5To check Actual and Set temperatures: _____________________________________________ 5

1.6To View Current Settings for Cook, Shake, Hold, and Hold Pre-Alarm: _____________________ 5

1.7To perform a Boil Out operation: __________________________________________________ 6

1.7.1	Automatic Boil Entry (Water Detection):	6
1.7.2	Manual Boil Entry:	6
2 To Enter Programming Level 1 (for the Store Manager):		7

2.1To Set Cook Temperature: _______________________________________________________ 7

2.2To Change a Product Key–Cook, Shake, Hold, Hold Pre-Alarm, Spin Time, and Spin Speed: ___ 8

2.2.1	Cook Time	8
2.2.2	Shake Time	8
2.2.3	Hold Time	8
2.2.4	Hold Pre-Alarm	9
2.2.5	Spin Time	9
2.2.6	Spin Rate	9

2.3To Exit Level 1 programming:_____________________________________________________ 9

3 To Change Options Level 2 ( for the Store Manager): 10

3.1Fahrenheit or Celsius Display: ___________________________________________________ 10

3.2Password Change or Required? _________________________________________________ 10

3.3Beeper ON/OFF: _____________________________________________________________ 11

3.4Language Selection:___________________________________________________________ 11

3.5Melt Cycle Type:______________________________________________________________ 11

3.6Recovery Test Value: __________________________________________________________ 12

4 To Enter Programming Level 3 (for the Technician) 13

4.1Offset the Temperature Display:__________________________________________________ 13

4.2Melt Cycle ON Time ___________________________________________________________ 13

4.3Minimum ON and OFF Cycle Time________________________________________________ 14

4.4Recovery Times:______________________________________________________________ 14

4.5Diagnostic Menu Entry _________________________________________________________ 15

4.5.1	Basket Lift Output	15
4.5.2	Brake	15
4.5.3	Heat Demand Output	15
4.5.4	Side On Output	15
4.5.5	Drain Switch Input	15
4.5.6	Lamp Test	15
4.5.7	Heat Feedback Input	15
4.5.8	Exit Diagnostic Menu	15

4.6Ready Level _________________________________________________________________ 16

4.7Temperature Operating Range___________________________________________________ 16

4.8More Service Menu Entry _______________________________________________________ 16

4.8.1 Instant On Toggle 16

Page 2 of 28 L22-280 Rev 1