Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
2.2To Change a Product
For each product key, Cook, Shake, Hold, and Hold
With display showing 
key to change. Press the 
key.
Display will show 
change.
, continue with the following section for each product
. Press the desired product key to
2.2.1Cook Time
Cook Time may be set for each product key. To deactivate any product key enter a zero value for cook time.
Display shows [nCK mm:ss] [TIME] where “n” is the key number, “CK” means Cook, and “mm:ss” is minutes and seconds.
Use the product keys for numeric entry to adjust the current setting. Press the 
key to save cook time and continue setup for this product key.
2.2.2Shake Time
Shake time is an alarm that sounds during Cook Time to prompt operators that the basket is about to perform a spinning process. Default for this value is zero, meaning the Shake Time is inactive. To use Shake Time, the time value must be a
Display shows [nSH mm:ss] [TIME] where “n” is the key number, “SH” means Shake, and “mm:ss” is time in minutes and seconds.
Use the product keys for numeric entry to adjust the current setting. Press the 
key to save shake time and continue setup for this product key.
Spin time for shake is set to 10 seconds, unless Spin Time section 2.2.5 is less than 10 seconds then they are the same.
Spin Rate for shake is same as Spin Rate section 2.2.6.
Note: The value entered for shake time is the time from the end of the cook.
2.2.3Hold Time
Cooked product may stand in holding bins for a period of time. This timer produces an alarm to inform operators to discard old product and start a new cook. Default for this value is zero, meaning the Hold Time is inactive.
Display shows [nHD mm:ss] [TIME], where “n” is the key number, “HD means HOLD, and “mm:ss” is minutes and seconds.
Use the product keys for numeric entry to adjust the current setting. Press the 
key to save hold time and continue setup for this product key.
Page 8 of 28 |
