Spin Fryer I12 Cooking Computer | Pitco Frialator L22-355 specs

		Spin Fryer I12 Cooking Computer
		Pitco P/N 60149505
4.8.2	Heat Demand Profile	17
4.8.3	Shake Alarm Duration	17
4.8.4	Hold Alarm Duration	17
4.8.5	Cancel Duration	17
4.8.6	Configuration Value	17
4.8.7	Factory Reset	18
4.8.8	Standing Pilot Toggle	18
4.8.9	Set Network Address	18

4.9To Exit Programming Level 3 ____________________________________________________ 18

5 Factory Menu Level 4 (for the Technician)

19

5.1Pitco Collect (toggle) __________________________________________________________ 19

5.2Offset Temperature Display _____________________________________________________ 19

5.3Melt Cycle ON Time ___________________________________________________________ 19

5.4Minimum ON and OFF Cycle Time________________________________________________ 19

5.5Recovery Test Values _________________________________________________________ 20

5.6Diagnostic Menu Entry _________________________________________________________ 20

5.7Ready Level _________________________________________________________________ 20

5.8Operating Temperature Range___________________________________________________ 20

5.9High Limit Value ______________________________________________________________ 20

5.10Spin Diagnostics ____________________________________________________________ 21

5.10.1	Motor On/Off	21
5.10.2	Motor Speed - Increase	21
5.10.3	Motor Speed Decrease	21
5.10.4	Spin Direction	21
5.10.5	Door Open	21
5.10.6	Cook Position Indicator	21
5.10.7	Load Position Indicator	21
5.10.8	Spin Position Indicator	21
5.10.9	Basket Lift Position (Cook)	21
5.10.10	Basket Lift Position (Load)	21
5.10.11	Basket Lift Position (Spin)	21

5.11Test On/Off ________________________________________________________________ 22

5.12More Factory Menu Entry _____________________________________________________ 22

5.12.1	Control ID Display	22
5.12.2	Set Network Address	22

5.13To Exit Factory Menu (Level 4): ________________________________________________ 22

6	Other Displays:	23
7	Mechanical Dimensions:	25
8	Electrical Connections at LEFT and RIGHT connectors):	26
9	Probe Resistance Chart:	27

Page 3 of 28

L22-355 Rev 1

Image 3

Pitco Frialator L22-355 service manual Spin Fryer I12 Cooking Computer

Contents

Important Information for Future Reference For Pitco P/N 60149505 Spin Fryer To Enter Programming Level 1 for the Store Manager Spin Fryer I12 Cooking Computer To turn the appliance on To turn the appliance OFFTo start a cook To check Actual and Set temperatures To cancel a cook To perform a Boil Out operation Automatic Boil Entry Water DetectionManual Boil Entry To Enter Programming Level 1 for the Store Manager To Set Cook Temperature Cook Time Shake TimeHold Time To Exit Level 1 programming Hold Pre-AlarmSpin Time Spin Rate Password Change or Required? To Change Options Level 2 for the Store ManagerFahrenheit or Celsius Display Beeper ON/OFF Language SelectionMelt Cycle Type Recovery Test Value Offset the Temperature Display To Enter Programming Level 3 for the TechnicianMelt Cycle on Time Minimum on and OFF Cycle Time Recovery Times Function Description Button Diagnostic Menu Entry Instant On Toggle Temperature Operating RangeMore Service Menu Entry Ready Level Configuration Value Shake Alarm DurationHold Alarm Duration Cancel Duration To Exit Programming Level Factory ResetStanding Pilot Toggle Set Network Address Offset Temperature Display Factory Menu Level 4 for the TechnicianPitco Collect toggle Recovery Test Values Operating Temperature RangeHigh Limit Value Used if object becomes stuck during spinning Spin Diagnostics To Exit Factory Menu Level Test On/OffMore Factory Menu Entry 12.1 Control ID Display System / Failure Other DisplaysPage Mechanical Dimensions J1Left Inputs Type Nominal Electrical Connections at Left and Right connectors Probe Resistance Probe Resistance ChartProbe Resistance in 5F Increments Ohms Mailing Address P.O. BOX 501, CONCORD, NH