STEP 1:
Cut opening in drywall
per template provided
STEP 2:
Slide bracket through drywall opening.
Expand bracket until contact is made
with inside wall of studs. Secure slide
bracket to studs.
STEP 3:
Tighten slide adjustmnent screws
To secure brackets together
CAUTION: Faliure to tighten locking
screws, can result in vibration noise
STEP 4:
Bolt speaker to mounting bracket
using machine screws provided
STEP 5:
Install baffle by tightening dogging screws
until baffle gasket contacts face of speaker
CAUTION: Overtightening can cause plastic baffle
to contact speaker and cause vibration noise
Please use Diagram 1 for a quick installation overview, which will be explored in greater detail throughout this manual.
DIAGRAM 1Installation Overview
CAUTION
• The BassX-W10 is designed to work only with the BBXW10 amplifier. To insure maximum sound quality and performance,
use only this amp.
• The installation bracket must be aligned accurately in the center of the cut out hole in the drywall. This is to insure
proper alignment with the woofer and baffle.
• Please follow the instructions below carefully. For technical inquires, please call 1-800-448-0976 or e-mail us at
techsupport@speakercraft.com.