Poulan 115260526 Pruning Important Points, Pruning Technique, Size limbs or slender material

Page 13

OPERATING INSTRUCTIONS FOR PRUNER ATTACHMENT

OPERATING POSITION

ALWAYS WEAR:

Head

Protection Eye

Protection

Long Pants

Heavy Shoes

DANGER: Do not extend arms above shoulders while pruning. Do not stand be- neath branch being cut.

WARNING: Always wear head, eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.

When operating unit, clip shoulder strap onto clamp, stand as shown and check for the fol- lowing:

SExtend your left arm and hold assist handle with your left hand.

SHold trigger handle with your right hand with finger on trigger switch.

SKeep motor end below waist level.

SKeep shoulder strap pad centered on your left shoulder and danger sign centered on

your back.

S Maintain full weight of tool on your left shoulder.

Always release the trigger switch as soon as the cut is completed, allowing the motor to stop. Keep the cord away from the cutting area. Position cord so it will not be caught on branches and the like during cutting.

PRUNING

WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or ob- jects at the nose of the guide bar when prun- ing. Allowing such contact can result in seri- ous injury.

IMPORTANT POINTS

SWork slowly, keeping both hands firmly gripped on the pruner. Maintain secure

footing and balance.

SPlan cut carefully. Check direction branch will fall.

SWatch out for springpoles. Springpoles are small size limbs which can catch the chain and whip toward you or pull you off balance. Use extreme caution when cutting small

size limbs or slender material.

SWatch out for branches immediately behind the branch being pruned. If the chain hits

the rear branch, damage to the unit may oc- cur.

SBe alert for springback. Watch out for branches that are bent or under pressure. Avoid being struck by the branch or the pruner when the tension in the wood fi- bers is released.

SKeep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

SLong branches should be removed in several pieces.

PRUNING TECHNIQUE

When ready to cut, squeeze trigger switch and allow unit to reach full speed. Apply a light cutting pressure. DO NOT use back and forth sawing action.

Second cut

Third cut

Collar

First cut

Pruning technique

1. Make the first cut 6 inches (15 cm) from the tree trunk on the bottom of the limb. Use top of guide bar to make this cut. Cut 1/3 through the diameter of the limb.

NOTE: When making the second and third cuts, rest the foot of the pruner against the tree limb that is being cut to prevent whipping of the branch.

Foot

2.Next, move 2 -- 4 inches (5 -- 10 cm) far- ther out on the limb and make a second cut all the way through the limb.

3.Then, make a final cut leaving a 1 -- 2 inch (2.5 -- 5 cm) collar from the trunk of the tree to avoid damage to the tree.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Manual de Instrucciones Manuel d’Instructions Safety Rules Identification of SymbolsIs necessary when used near children Plan AheadUse a voltage supply as shown on unit Electrical Safety applies to all attachmentsPlosive vapors can build up Do not use multiple cordsKickback Pruner SafetyRotational Kickback can occur when Line Trimmer Safety Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlTransporting and Storage Maintain Your Unit in Good Working OrderCultivator Safety Blower SafetyRecommended Attachments For Optional AttachmentsVacuum Safety Edger SafetyPruner Safety Reciprocating Blade Snow Thrower Safety Hedge Trimmer SafetyHigh speed causing injury Shoulder Strap Assembly AssemblyAdjusting the Assist Handle Tools RequiredOperation Installing Attachment Hanger Installing Optional ATTACH- MentsAttach the Extension Cord to Your Unit Before Starting UnitPruning Technique Pruning Important PointsSize limbs or slender material FootCutting Methods Trimmer Line AdvanceRightWrong TrimmingMaintenance BAR Maintenance Service and AdjustmentsLubrication Chain SharpeningTo Replace Chain Chain ReplacementRight WrongUser Replaceable Service Parts Chain AdjustmentReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Poulan Trouble Cause Remedy

115260526 specifications

The Poulan 115260526 is a versatile chainsaw that has gained popularity among both amateur and professional users for its reliability and performance. This model is designed for a variety of cutting tasks, ranging from trimming branches to felling trees. It combines a powerful engine with innovative features, making it an ideal choice for homeowners and landscapers alike.

One of the standout characteristics of the Poulan 115260526 is its robust engine. The chainsaw is equipped with a 25cc, 2-stroke engine that delivers impressive power for its class. This efficient engine enables users to tackle demanding cutting chores without experiencing unnecessary fatigue. Additionally, the lightweight design of the chainsaw makes it easier to maneuver and reduces the strain on the operator during extended use.

Another key feature of the Poulan 115260526 is its Easy Start technology. This intuitive starting system reduces the effort required to start the engine, allowing users to get to work quickly without the hassle of traditional pull-start systems. The reduced resistance in the starting mechanism enhances user experience, making it suitable for those who may be less experienced with chainsaws.

Safety is always a concern when using power tools, and the Poulan 115260526 addresses this with several built-in safety features. It comes equipped with a chain brake that activates when a kickback occurs, stopping the chain instantly to reduce the risk of injury. The chainsaw also features a hand guard to protect the user’s hands while operating.

The chainsaw's cutting capability is further enhanced by its Oregon chain and bar system. The 16-inch bar length paired with a high-quality chain ensures smooth and swift cutting, allowing users to tackle tougher wood with confidence. The automatic oiling system helps maintain the chain’s performance by delivering oil to the bar and chain during operation, thus extending the life of the components.

In terms of maintenance, the Poulan 115260526 is designed for easy access to critical parts, ensuring that users can swiftly perform routine checks and repairs. This practicality contributes to the chainsaw’s longevity and reliability over time.

In summary, the Poulan 115260526 stands out for its powerful yet lightweight design, user-friendly starting technology, safety features, and efficient cutting performance. These attributes make it a valuable tool for anyone looking to maintain their property or engage in landscaping projects. With the right care and maintenance, this chainsaw is sure to deliver exceptional results for years to come.
Top Page Image Contents