Poulan 115260526 instruction manual Edger Safety, Vacuum Safety, Pruner Safety Reciprocating Blade

Page 8

EDGER SAFETY

DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA. Do not attempt to clear away cut material when the blade is in motion. Make sure switch is in the off position and the power source is disconnected when removing jammed material from the cutting blade. Do not grab or hold unit by the cutting blade.Inspect the area to be edged before each use. Re- move objects (rocks, broken glass, nails, wire, etc.) which can be thrown by the blade or can wrap around the shaft.

WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by the blade or can wrap around the shaft.

SBlade rotates momentarily after the trigger is released. The blade can seriously cut

you or others.

SAllow blade to stop before removing it from the cut.

SHold the unit firmly with both hands.

SKeep firm footing and balance. Do not over-

reach or stand on unstable surfaces.

SThrow away blades that are bent, warped, cracked, broken or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit.

SKeep all parts of your body away from the blade.

S Keep blade guard in place and in good working order.

SAlways keep the wheel in contact with the

ground.

S Always push the unit slowly over the ground. Stay alert for uneven sidewalks, holes in the terrain, large roots, etc.

STo reduce the risk of fire, do not allow exces-

sive grass, leaves, or grease to accumulate on the attachment.

S Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging.

SAVE THESE INSTRUCTIONS

WARNING: Use of any other attach- ments not recommended in this manual may in- crease the risk of injury to persons, fire, or elec- trical shock. Use of attachments not covered under the list of recommended attachments in this manual have not been evaluated for use with this powerhead by Underwriters Laborato- ries (see RECOMMENDED ATTACHMENTS).

WARNING: This unit is not designed for use with a brushcutter attachment.

VACUUM SAFETY

WARNING: Inspect area before starting unit. Remove all debris and hard ob- jects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Never place objects inside the vacuum tube(s). Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

S Never run unit without the proper equip- ment attached. When using your unit as a vacuum, always install vacuum tube(s).

SCheck air intake opening or vacuum tube(s) frequently, always with engine stopped and unit disconnected from power source. Keep vents and tubes free of debris which can ac- cumulate and restrict proper air flow.

PRUNER SAFETY (RECIPROCATING BLADE)

WARNING: The reciprocating blade can cause severe injury. Inspect the unit be- fore use. Do not operate unit with a bent, cracked or dull blade. Keep away from the blade.

WARNING: The reciprocating blade is sharp. Do not touch. To prevent serious injury, always stop engine and ensure blade has stopped moving, disconnect unit from power source, and wear gloves when changing or handling the blade.

WARNING: A coasting blade can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade has completely stopped mov- ing. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade when it is moving.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions Identification of Symbols Safety RulesIs necessary when used near children Plan AheadElectrical Safety applies to all attachments Use a voltage supply as shown on unitPlosive vapors can build up Do not use multiple cordsRotational Kickback can occur when Pruner SafetyKickback Kickback Safety Features Line Trimmer SafetyReduce the Chance Kickback Maintain ControlMaintain Your Unit in Good Working Order Transporting and StorageBlower Safety Cultivator SafetyRecommended Attachments For Optional AttachmentsPruner Safety Reciprocating Blade Edger SafetyVacuum Safety High speed causing injury Hedge Trimmer SafetySnow Thrower Safety Assembly Shoulder Strap AssemblyAdjusting the Assist Handle Tools RequiredOperation Installing Optional ATTACH- Ments Installing Attachment HangerAttach the Extension Cord to Your Unit Before Starting UnitPruning Important Points Pruning TechniqueSize limbs or slender material FootTrimmer Line Advance Cutting MethodsRightWrong TrimmingMaintenance Service and Adjustments BAR MaintenanceLubrication Chain SharpeningChain Replacement To Replace ChainRight WrongChain Adjustment User Replaceable Service PartsReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Trouble Cause Remedy Poulan

115260526 specifications

The Poulan 115260526 is a versatile chainsaw that has gained popularity among both amateur and professional users for its reliability and performance. This model is designed for a variety of cutting tasks, ranging from trimming branches to felling trees. It combines a powerful engine with innovative features, making it an ideal choice for homeowners and landscapers alike.

One of the standout characteristics of the Poulan 115260526 is its robust engine. The chainsaw is equipped with a 25cc, 2-stroke engine that delivers impressive power for its class. This efficient engine enables users to tackle demanding cutting chores without experiencing unnecessary fatigue. Additionally, the lightweight design of the chainsaw makes it easier to maneuver and reduces the strain on the operator during extended use.

Another key feature of the Poulan 115260526 is its Easy Start technology. This intuitive starting system reduces the effort required to start the engine, allowing users to get to work quickly without the hassle of traditional pull-start systems. The reduced resistance in the starting mechanism enhances user experience, making it suitable for those who may be less experienced with chainsaws.

Safety is always a concern when using power tools, and the Poulan 115260526 addresses this with several built-in safety features. It comes equipped with a chain brake that activates when a kickback occurs, stopping the chain instantly to reduce the risk of injury. The chainsaw also features a hand guard to protect the user’s hands while operating.

The chainsaw's cutting capability is further enhanced by its Oregon chain and bar system. The 16-inch bar length paired with a high-quality chain ensures smooth and swift cutting, allowing users to tackle tougher wood with confidence. The automatic oiling system helps maintain the chain’s performance by delivering oil to the bar and chain during operation, thus extending the life of the components.

In terms of maintenance, the Poulan 115260526 is designed for easy access to critical parts, ensuring that users can swiftly perform routine checks and repairs. This practicality contributes to the chainsaw’s longevity and reliability over time.

In summary, the Poulan 115260526 stands out for its powerful yet lightweight design, user-friendly starting technology, safety features, and efficient cutting performance. These attributes make it a valuable tool for anyone looking to maintain their property or engage in landscaping projects. With the right care and maintenance, this chainsaw is sure to deliver exceptional results for years to come.
Top Page Image Contents