Poulan 115260526 instruction manual Maintenance

Page 15

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above

the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect unit from power source before performing maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SBar clamp nut S Chain

S Bar adjusting screw S Housing screws

S Assist handle screw S Debris shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

STrigger switch -- Ensure trigger switch func- tions properly by pressing and releasing the trigger switch. Make sure motor starts and

stops.

SOil tank -- Discontinue use of unit if oil tank shows signs of damage or leaks.

INSPECT AND CLEAN UNIT AND LABELS

SAfter each use, inspect complete unit for

loose or damaged parts. Clean the unit and labels using a damp cloth.

SWipe off unit with a clean dry cloth.

CHECK CHAIN TENSION

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving. Make chain adjustments with lower end supported. Chain tension is very important. Chains stretch during use. This is especially true dur- ing the first few times you use your pruner. Al- ways check chain tension each time you use your unit.

1.Use the screwdriver end of the chain ad- justment tool (bar tool) to move chain around guide bar to ensure kinks do not exist. The chain should rotate freely.

Chain Adjustment Tool

Guide

Bar

2.Loosen bar clamp nut until it is finger tight against the bar clamp.

 

 

 

Adjusting Screw

Bar clamp nut

3.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail. Then, turn adjusting screw an addi- tional 1/4 turn.

Adjusting Screw -- 1/4 Turn

4.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

5.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn adjust- ing screw 1/4 turn clockwise. Repeat until sag does not exist.

6.While lifting tip of guide bar, tighten bar clamp nut securely with the bar tool.

7.Use the screwdriver end of the bar tool to move chain around guide bar.

8.If chain does not rotate, it is too tight. Slightly loosen bar clamp nut and loosen chain by turning the adjusting screw 1/4 turn counterclockwise. Retighten bar clamp nut.

9.If chain is too loose, it will sag below the guide bar and needs to be tightened fol- lowing above procedure.

WARNING: DO NOT operate the pruner if the chain is loose. If the pruner is oper- ated with a loose chain, the chain could jump off the guide bar and result in serious injury.

CHECK CHAIN SHARPNESS

A sharp chain makes wood chips. A dull chain makes a sawdust powder and cuts slowly. See CHAIN SHARPENING in the SERVICE AND ADJUSTMENTS section.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Identification of SymbolsSafety Rules Is necessary when used near childrenDo not use multiple cords Electrical Safety applies to all attachmentsUse a voltage supply as shown on unit Plosive vapors can build upPruner Safety KickbackRotational Kickback can occur when Maintain Control Kickback Safety FeaturesLine Trimmer Safety Reduce the Chance KickbackTransporting and Storage Maintain Your Unit in Good Working OrderFor Optional Attachments Blower SafetyCultivator Safety Recommended AttachmentsEdger Safety Vacuum SafetyPruner Safety Reciprocating Blade Hedge Trimmer Safety Snow Thrower SafetyHigh speed causing injury Tools Required AssemblyShoulder Strap Assembly Adjusting the Assist HandleOperation Before Starting Unit Installing Optional ATTACH- MentsInstalling Attachment Hanger Attach the Extension Cord to Your UnitFoot Pruning Important PointsPruning Technique Size limbs or slender materialTrimming Trimmer Line AdvanceCutting Methods RightWrongMaintenance Chain Sharpening Service and AdjustmentsBAR Maintenance LubricationWrong Chain ReplacementTo Replace Chain RightSeasonal Storage Chain AdjustmentUser Replaceable Service Parts Replacing the LineTroubleshooting Table Cause Remedy Poulan Trouble Cause Remedy

115260526 specifications

The Poulan 115260526 is a versatile chainsaw that has gained popularity among both amateur and professional users for its reliability and performance. This model is designed for a variety of cutting tasks, ranging from trimming branches to felling trees. It combines a powerful engine with innovative features, making it an ideal choice for homeowners and landscapers alike.

One of the standout characteristics of the Poulan 115260526 is its robust engine. The chainsaw is equipped with a 25cc, 2-stroke engine that delivers impressive power for its class. This efficient engine enables users to tackle demanding cutting chores without experiencing unnecessary fatigue. Additionally, the lightweight design of the chainsaw makes it easier to maneuver and reduces the strain on the operator during extended use.

Another key feature of the Poulan 115260526 is its Easy Start technology. This intuitive starting system reduces the effort required to start the engine, allowing users to get to work quickly without the hassle of traditional pull-start systems. The reduced resistance in the starting mechanism enhances user experience, making it suitable for those who may be less experienced with chainsaws.

Safety is always a concern when using power tools, and the Poulan 115260526 addresses this with several built-in safety features. It comes equipped with a chain brake that activates when a kickback occurs, stopping the chain instantly to reduce the risk of injury. The chainsaw also features a hand guard to protect the user’s hands while operating.

The chainsaw's cutting capability is further enhanced by its Oregon chain and bar system. The 16-inch bar length paired with a high-quality chain ensures smooth and swift cutting, allowing users to tackle tougher wood with confidence. The automatic oiling system helps maintain the chain’s performance by delivering oil to the bar and chain during operation, thus extending the life of the components.

In terms of maintenance, the Poulan 115260526 is designed for easy access to critical parts, ensuring that users can swiftly perform routine checks and repairs. This practicality contributes to the chainsaw’s longevity and reliability over time.

In summary, the Poulan 115260526 stands out for its powerful yet lightweight design, user-friendly starting technology, safety features, and efficient cutting performance. These attributes make it a valuable tool for anyone looking to maintain their property or engage in landscaping projects. With the right care and maintenance, this chainsaw is sure to deliver exceptional results for years to come.
Top Page Image Contents