Jonsered BC 2128 manuel dutilisation Fitting the trimmer guard and trimmer head

Page 12

ASSEMBLY

Fitting the trimmer guard and trimmer head

SFit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (D).

SFit the drive disc (B) on the output shaft. S Turn the shaft until one of the holes in the drive disc aligns with the corresponding

hole in the gear housing.

S Insert the locking pin (C) in the hole to lock the shaft.

S Screw on the trimmer head (H) in the op- posite direction to the direction of rota- tion.

STo dismantle, follow the instructions in the reverse order.

115304126 Rev. 2 7/15/10

English--- 12

Image 12

Contents FR 28-53 ES Symbol Explanation SymbolsAlways wear Rev 7/15/10Contents What is WHAT? What is what?22 15 Support flangeGeneral Safety Precautions Personal protective equipmentMachine’s safety equipment Wear anti--slip and stable bootsThrottle lock-out Stop switch Cutting attachment guardHarness quick release MufflerCutting equipment Locking nutReduce the risk of blade thrust Cutting equipment General rulesSharpening grass cutters and grass blades Trimmer headAssembly Fitting the handlebarFitting the harness Fitting blades and trimmer heads Fitting a blade guard, grass blade and grass cutterCorrect height Correct balanceFitting the trimmer guard and trimmer head Fuel safety Fuel HandlingFuel Operating problems FuelingMixing Add the remaining amount of petrolStarting and Stopping Check before startingStarting and stopping Cold engineWarm engine For throttle handles with a start throttle lock-outStopping This can damage the machineBasic safety rules Working TechniquesGeneral working instructions Basic working techniquesGrass clearing using a grass blade Grass trimming with a trimmer headTrimming ClearingSweeping Maintenance CarburetorUnit/Maintenance Safety MufflerSpark plug Cleaning the air filter Loss of engine powerAir filter Bevel gearMaintenance schedule Maintenance Daily Weekly Monthly Maintenance MaintenanceView Check that the stop switch works correctly Check that the spark plug is fitted with a SuppressorTechnical Data Technical dataDeclaration of Conformity EC Declaration of Conformity Only applies to EuropeTrimmer Head Line Loading Instructions Plastic Blades Tri Cut 115304126 Rev 15/10