Jonsered BC 2128 Warm engine, For throttle handles with a start throttle lock-out, Stopping

Page 16

STARTING AND STOPPING

NOTE: If engine dies, return blue engine choke lever to the closed position and repeat starting steps.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended.

This can damage the machine.

Warm engine

With a warm engine, move the blue engine choke lever to the ½ position. Pull starter rope until engine runs. Move the blue engine choke lever to the opened position.

CAUTION!

Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with dam- aged spark plug cap.

For throttle handles with a start throttle lock-out:

Set the throttle to the start position by first pressing the throttle lock--out and the throttle trigger, then pressing the start throttle button (A). Then release the throttle lock--out and the throttle trigger, followed by the start throttle button. The throttle function is now activated. To return the en- gine to idle, press the throttle lock--out and throttle trigger again.

Stopping

Stop the engine by pushing and holding the stop switch in the STOP position until the engine stops.

CAUTION! The stop switch automatically returns to the start position. In order to pre- vent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or per- forming maintenance.

WARNING: When the engine is started with the choke in the closed position the cutting attachment will start to rotate immediately.

115304126 Rev. 2 7/15/10

English--- 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents FR 28-53 ES Symbol Explanation SymbolsAlways wear Rev 7/15/10Contents What is WHAT? What is what?22 15 Support flangeGeneral Safety Precautions Personal protective equipmentWear anti--slip and stable boots Machine’s safety equipmentThrottle lock-out Stop switch Cutting attachment guardHarness quick release MufflerLocking nut Cutting equipmentReduce the risk of blade thrust Cutting equipment General rulesSharpening grass cutters and grass blades Trimmer headFitting the handlebar AssemblyFitting the harness Fitting blades and trimmer heads Fitting a blade guard, grass blade and grass cutterCorrect height Correct balanceFitting the trimmer guard and trimmer head Fuel Handling Fuel safetyFuel Operating problems FuelingMixing Add the remaining amount of petrolStarting and Stopping Check before startingStarting and stopping Cold engineWarm engine For throttle handles with a start throttle lock-outStopping This can damage the machineBasic safety rules Working TechniquesGeneral working instructions Basic working techniquesGrass clearing using a grass blade Grass trimming with a trimmer headTrimming ClearingSweeping Maintenance CarburetorMuffler Unit/Maintenance SafetySpark plug Cleaning the air filter Loss of engine powerAir filter Bevel gearMaintenance schedule Maintenance Daily Weekly Monthly Maintenance MaintenanceView Check that the stop switch works correctly Check that the spark plug is fitted with a SuppressorTechnical Data Technical dataDeclaration of Conformity EC Declaration of Conformity Only applies to EuropeTrimmer Head Line Loading Instructions Plastic Blades Tri Cut 115304126 Rev 15/10
Top Page Image Contents