Jonsered BC 2128 manuel dutilisation Sweeping

Page 19

WORKING TECHNIQUES

SDo not allow the trimmer head to con-- stantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head.

Sweeping

SThe fan effect of the rotating line can be used for quick and easy clearing up. Hold the trimmer line parallel to and above the area to be swept and move the tool to and fro.

SWhen cutting and sweeping you should use full throttle to obtain the best results.

WARNING: Neither the operator of the machine nor anyone else may attempt to remove the cut material while the engine is running or the trimmer line is rotating, as this can result in serious injury. Stop the engine and trimmer head before you remove material that has wound around the drive shaft as otherwise there is a risk of injury. The bevel gear can get hot during use and may remain so for a while afterwards. You could get burned if you touch it.

WARNING: Watch out for thrown objects. Always wear eye protection. Never lean over the cutting attach- ment guard. Stones, rubbish, etc. can be thrown up into the eyes causing blindness or serious injury. Keep unauthorized persons at a dis- tance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 metres. Stop the machine immediately if anyone approaches.

115304126 Rev. 2 7/15/10

English--- 19

Image 19

Contents FR 28-53 ES Rev 7/15/10 Symbol ExplanationSymbols Always wearContents Support flange What is WHAT?What is what? 22 15Personal protective equipment General Safety PrecautionsWear anti--slip and stable boots Machine’s safety equipmentThrottle lock-out Muffler Stop switchCutting attachment guard Harness quick releaseLocking nut Cutting equipmentReduce the risk of blade thrust Trimmer head Cutting equipmentGeneral rules Sharpening grass cutters and grass bladesFitting the handlebar AssemblyFitting the harness Correct balance Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter Correct heightFitting the trimmer guard and trimmer head Fuel Handling Fuel safetyFuel Add the remaining amount of petrol Operating problemsFueling MixingCold engine Starting and StoppingCheck before starting Starting and stoppingThis can damage the machine Warm engineFor throttle handles with a start throttle lock-out StoppingBasic working techniques Basic safety rulesWorking Techniques General working instructionsClearing Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping Carburetor MaintenanceMuffler Unit/Maintenance SafetySpark plug Bevel gear Cleaning the air filterLoss of engine power Air filterCheck that the spark plug is fitted with a Suppressor Maintenance scheduleMaintenance Daily Weekly Monthly Maintenance Maintenance View Check that the stop switch works correctlyTechnical data Technical DataEC Declaration of Conformity Only applies to Europe Declaration of ConformityTrimmer Head Line Loading Instructions 115304126 Rev 15/10 Plastic Blades Tri Cut