Jonsered BC 2128 Stop switch, Cutting attachment guard, Harness quick release, Muffler

Page 7

GENERAL SAFETY PRECAUTIONS

See instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting attachment rotates with the throttle in the idle position then the carburettor idle setting must be checked. See instructions under the heading Maintenance.

Stop switch

Make sure the engine stops when you push and hold the stop switch.

Cutting attachment guard

This guard is intended to prevent loose objects from being thrown towards the operator. The guard also protects the operator from accidental contact with the cutting attachment.

Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked.

Always use the recommended guard for the cutting attachment you are using. See the “Technical data” section.

WARNING: Never use a cutting attachment without an approved guard. See the section on “Technical data”. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Use of incorrectly wound trimmer line or an incorrect cutting attachment increases the level of vibration.

WARNING: Overexposure to vibration can lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experi- ence symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin color or condition. These symptoms normally appear in the fingers, hands or wrists. The risk increases at low temperatures.

Harness quick release

There is an easily accessible, harness quick release fitted at the front in case of an emergency that requires you to free your- self from the machine and harness.

See instructions under the heading Adjust- ing the harness.

Check that the harness straps are correctly positioned. Once the harness and machine have been adjusted, check that the harness quick release works correctly.

Muffler

The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator.

CAUTION! Muffler is fitted with a catalytic convertic designed to reduce harmful ex- haust gases.

115304126 Rev. 2 7/15/10

English--- 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents FR 28-53 ES Rev 7/15/10 Symbol ExplanationSymbols Always wearContents Support flange What is WHAT?What is what? 22 15Personal protective equipment General Safety PrecautionsWear anti--slip and stable boots Machine’s safety equipmentThrottle lock-out Muffler Stop switchCutting attachment guard Harness quick releaseLocking nut Cutting equipmentReduce the risk of blade thrust Trimmer head Cutting equipmentGeneral rules Sharpening grass cutters and grass bladesFitting the handlebar AssemblyFitting the harness Correct balance Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter Correct heightFitting the trimmer guard and trimmer head Fuel Handling Fuel safetyFuel Add the remaining amount of petrol Operating problemsFueling MixingCold engine Starting and StoppingCheck before starting Starting and stoppingThis can damage the machine Warm engineFor throttle handles with a start throttle lock-out StoppingBasic working techniques Basic safety rulesWorking Techniques General working instructionsClearing Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping Carburetor MaintenanceMuffler Unit/Maintenance SafetySpark plug Bevel gear Cleaning the air filterLoss of engine power Air filterCheck that the spark plug is fitted with a Suppressor Maintenance scheduleMaintenance Daily Weekly Monthly Maintenance Maintenance View Check that the stop switch works correctlyTechnical data Technical DataEC Declaration of Conformity Only applies to Europe Declaration of ConformityTrimmer Head Line Loading Instructions 115304126 Rev 15/10 Plastic Blades Tri Cut
Top Page Image Contents