SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | EXPLANATION |
| Safety Alert Symbol | Indicates danger, warning or caution. It means |
|
| attention!!! Your safety is involved. |
|
|
|
| Read Your Operator’s Manual | Your manual contains special messages to |
|
| bring attention to potential safety concerns, |
|
| machine damage as well as helpful operating and |
|
| servicing information. Please read all the |
|
| information carefully to avoid injury and machine |
|
| damage. |
|
|
|
| Wear eye and hearing protection. | Wear eye protection which is marked to comply |
|
| with ANSI Z87.1 as well as hearing protection |
|
| when operating this equipment. |
|
|
|
| Keep bystanders away. | Keep all bystanders at least 50 feet (15 m) |
|
| away. |
Ricochet.
Danger of Ricochet.
No blade.
Do not install any type of blade on this unit.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
SAVE THESE INSTRUCTIONS
Page 4