Husqvarna YTH2242 TF To Stop Mower Blades, Reverse Operation System ROS, To Operate on Hills

Page 11

OPERATION

TO STOP MOWER BLADES

•Disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield

(S) in place (See Fig. 10).

S

Fig. 10

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless

absolutely necessary.

 

02828

ROS "ON"

ENGINE "ON" POSITION

POSITION

(NORMAL OPERATING)

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before and while backing.

•Slowly depress reverse drive pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowlydepressappropriatedrivepedaltoslowestsetting.

•Make all turns slowly.

TO TRANSPORT (See Fig. 11)

When pushing or towing your tractor, be sure to disengage transmissionbyplacingfreewheelcontrolinfreewheeling po- sition.Freewheelcontrolislocatedatthereardrawbaroftractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

Fig. 11

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents YTH2242 TF II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Toremovetractorfromcarton AssemblyTools Required for Assembly Unassembled PartsCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation CJK Know Your TractorStopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking BRAKESee FigTo USE Cruise Control J See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Transport See Fig To Stop Mower BladesReverse Operation System ROS To Operate on HillsADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelAutomatic Transmission Warm UP Mowing TipsPurge Transmission Schedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig BatteryTractor Blade CareEngine Deck Washout Port See Fig CleaningIN-LINE Fuel Filter See Fig To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Raise attachment lift lever to highest position To Level Mower To Check Brake To Replace Mower Blade Drive BeltTo Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBERTransmission Engine OIL StorageOther Fuel SystemProblem Cause Correction TroubleshootingEngine continues To run when operBattery will not Fires when turnSCH12 SchematicElectrical KEY Part Description 196 Chassis Drive Nut U-CHNL 1/4-20 550DP .350 PNL Engine Spark Arrester KITEngine Power Rating Information Steering Assembly 532 41 Wheel, Steering 532 42 Seat Seat AssemblyWheels and Tires DecalsMower Deck Tractor Model NO. YTH2242 TF 96041022400, Product no 41 532 40 34-07 Link Lift Susp Mower Rear Mower LiftOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation12.16.10 TH

YTH2242 TF specifications

The Husqvarna YTH2242 TF is a versatile and efficient riding mower that combines power, ease of use, and advanced technology to provide an exceptional mowing experience. Designed for residential use, this model is ideal for homeowners with medium to large lawns, ensuring a well-manicured appearance with minimal effort.

One of the standout features of the YTH2242 TF is its robust 22 horsepower Kohler engine. This powerful engine ensures reliable performance and ample torque to tackle even the toughest mowing conditions. Whether you are navigating uneven terrains or thick grass, this engine provides the performance needed to get the job done efficiently.

The mower features a 42-inch cutting deck, which is designed to cover a larger area in a shorter time, making mowing less of a chore. The cutting deck is made from high-quality materials, ensuring durability and resistance against wear and tear. With the ability to adjust cutting heights quickly, users can easily customize their mowing experience according to their lawn’s needs.

Equipped with a hydrostatic transmission, the Husqvarna YTH2242 TF offers smooth and seamless speed changes without the need to shift gears. This feature allows for enhanced maneuverability and control, enabling the operator to focus more on navigating the lawn rather than constantly adjusting the speed.

The mower's ergonomically designed seat provides comfort during extended mowing sessions. The steering wheel is positioned to enhance visibility and ease of operation, ensuring that users can maintain focus on the landscape ahead. Additionally, the onboard storage compartment makes it convenient to keep essential tools and items close at hand.

Safety is a top priority in the design of the YTH2242 TF. The mower is equipped with safety features such as a blade brake that automatically engages when the operator leaves the seat. This ensures that the blades stop rapidly, reducing the risk of accidents.

Furthermore, the Husqvarna YTH2242 TF supports various accessories, enhancing its functionality. Options include mulch kits, baggers, and tow-behind carts, making it a truly adaptable machine for diverse lawn care tasks.

In summary, the Husqvarna YTH2242 TF is a powerful riding mower that offers reliability, comfort, and advanced features, making it an excellent choice for homeowners seeking to maintain their lawns with precision and ease. With its combination of cutting-edge technology and user-friendly design, the YTH2242 TF stands out in the residential lawn care market.
Top Page Image Contents