important safety instructions
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Under abusive conditions, liquid may leak from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid leaking from the battery may cause irritation or burns.
When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.
Do not dispose of batteries in a fire. The cells may explode. Batteries should be recycled. Consult your local waste authority for information regarding available recycling and/or disposal options.
When replacing batteries, all batteries should be replaced at the same time. Mixing fresh batteries and discharged batteries could increase internal cell pressure and rupture the discharged batteries.
When replacing batteries into this product, observe proper polarity. Reversing polarity can result in leakage or explosion.
Save these instructions.
SPECIFIC SAFETY RULES
Use
Replace any blade or other parts that are cracked or damaged. Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious personal injury to the operator, bystanders, or damage to the unit.
Never cut any material over 3/8 in. diameter.
Maintain a firm grip on handle while cutting with a blade. Keep the blade away from body.
Know how to stop the unit quickly in an emergency.
Keep both hands on handles when the extension handle is connected to the unit and the unit is in use.
Check damaged parts. Before further use of the grass shear/ shrubber, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.
Install the padlock (not included) into the switch before making any adjustments, changing accessories, or storing the grass shear/shrubber. Such preventive safety measures reduce the risk of starting the product accidentally.
Service on the product must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product.
Always stop motor, padlock (not included) switch when not in use, before attempting to remove any obstruction caught or jammed in the blade, before removing, installing, or making any blade adjustments.
Battery powered units do not have to be plugged into an outlet; therefore, they are always in operating condition. Be aware of possible hazards even when the unit is not operating.
NEVER attempt to change the cutting attachments without first padlocking (not included) the switch or installing the lockout pin into the switch.
Never use grass shear/shrubber if the switch will not turn the unit on or off. A unit that cannot be controlled by the switch is dangerous and must be repaired before use.
Grass shear/shrubber is for cutting grass, hedges, and light weeds only. Do not use for any other purpose.
Maintain grass shear/shrubber with care. Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.
Know your power tool. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this power tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
For best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store outside or in vehicles.
Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.
Page