| TROUBLESHOOTING |
|
| |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
BATTERY PACK WILL NOT CHARGE |
|
|
| |
POSSIBLE CAUSE | POSSIBLE SOLUTION | |||
No power to charger or battery pack. | Check charger. | |||
Battery pack has failed. | Replace battery pack. | |||
MOTOR OPERATES SLOWLY OR WILL NOT OPERATE | ||||
POSSIBLE CAUSE | POSSIBLE SOLUTION | |||
Battery pack is not charged. | Charge battery pack. | |||
STRING HEAD WILL NOT ADVANCE LINE |
|
|
| |
POSSIBLE CAUSE | POSSIBLE SOLUTION | |||
String head bound with grass. | Stop the unit and clean string head. | |||
String head out of line. | Refill with new line. | |||
Spool bound up. | Replace the spool. | |||
String head dirty. | Clean spool and spool housing. | |||
Line welded. | Disassemble, remove the welded section and | |||
|
| rewind the line. | ||
Line twisted when refilled. | Disassemble and rewind the line. | |||
Not enough line is exposed. | Push the bump knob and pull out line until 4 inches | |||
|
| (102 mm.) of line is outside of the string head. | ||
If the above solutions don't solve the problem, take the unit to your nearest Homelite Authorized Service Center for service or repair. Do not return the unit to the retailer.
|
| PRODUCT SPECIFICATIONS |
|
|
|
| |
|
|
| |
|
|
| |
UT31810 STRING TRIMMER SPECIFICATIONS | |||
Motor | 18 Volt DC | ||
Battery Pack | |||
Charge Rate | 1 to | ||
String Head | Bump Head | ||
Cutting Line Diameter | 0.065 in. (1.65 mm.) | ||
Cutting Path Diameter | 9 in. (229 mm) | ||
Weight with Battery pack | 5.5 lbs. (2.6 kg.) | ||
Page 16