Husqvarna 536LiHD70X, 536LiHD60X manual Troubleshooting schedule, Battery charger

MAINTENANCE

Troubleshooting schedule

Control panel

Troubleshooting takes place from the keypad.

LED display	Possible faults	Possible action
Green activate LED flashing.	Low battery voltage.	Charge the battery
Error LED flashes.	Overload.	The cutting attachment is jammed.
		Release the cutting attachment.
	Temperature deviation	Allow the machine to cool down.
	The power trigger and the activate	Release the power trigger and the
	button are pressed at the same time.	machine is active.
The machine does not run	Dirt in battery connectors.	Clean with compressed air or a soft
		brush.
Error LED is lit with red light.	Service	Contact your service agent.

Troubleshooting the battery and/or the battery charger during charging.

Battery

LED display	Possible faults	Possible action
Green activate LED flashing.	Low battery voltage.	Charge the battery
		Use the battery in surroundings
Error LED flashing	Temperature deviation	where temperatures are between -10
		°C and 40 °C.
		Check that the mains voltage
	Over voltage	corresponds with that stated on the
		rating plate on the machine.
		Remove the battery from the battery
		charger.
Error LED is lit	Cell difference too much (1V)	Contact your service agent.
Battery charger

LED display	Possible faults	Possible action
		Use the battery charger only when the
Error LED flashing	Temperature deviation	surrounding temperature is between 5
		°C and 40 °C.
Error LED is lit		Contact your service agent.

20 – English