STARTING AND STOPPING
Check before starting
•Inspect the working area. Remove any objects that could be thrown out.
•Check the cutting attachment. Never use blades that are dull, cracked or damaged.
•Check that the machine is in perfect working order. Check that all nuts and screws are tight.
•Only use the machine for the purpose it was intended for.
•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.
Gloves should be worn when necessary.
•All covers must be correctly fitted and undamaged before you start the machine.
Connect battery to the machine
Use only a Husqvarna original BLi battery in your machine.
•Insert the battery in the machine. The battery should slide easily into the battery holder on the machine. If the battery does not slide in easily, it is not being inserted correctly. The battery will lock itself into place when you hear a click. Make sure the battery is fitted correctly to the machine.
Starting and stopping
! | WARNING! Make sure no unauthorised | |
persons are in the working area. | ||
| ||
| Otherwise there is a risk of serious | |
| personal injury. The safety distance is 15 | |
| meters. |
Starting
Turn on the machine. Press and hold the start button (>1 sec.) until the green LED is lit.
Press the power trigger lockout up. It is placed on the front handle.
Then press the power trigger up to apply full power.
Stopping
Stop the machine by releasing the power trigger or the power trigger lockout and deactivate the machine.
Remove the battery from the machine by pressing the two release buttons and pulling out the battery.
IMPORTANT! Always remove the battery to prevent the machine being started by accident.
English – 15