Gardena 8882 manual Assembly, Initial Operation, Fitting the hand guard, Charging the battery

GB	The charging cable should be checked regularly for	After charging, disconnect the charger from the mains.
	signs of damage or ageing (brittleness) and may only	Only charge battery between 10 – 45 °C. After heavy
	be used if it is in perfect condition.
		duty service allow battery to cool down first.
	The charger unit provided may only be used to charge	Storage:
	the rechargeable batteries supplied with the Hedge
		The trimmer must not be stored over 35 °C or under
	Trimmer.
	Non-rechargeable batteries must not be charged with	direct exposure to sunlight.
		Do not store the Hedge Trimmer in places with static
	this battery charger (danger of fire).
	The Hedge Trimmer must not be operated during	electricity.
	charging.

3. Assembly

Fitting the hand guard:

	1
5	3
	4

2

Before the hand guard 5 can be fitted, the position of the hedge trimmer has to be changed – from A the packing position A to the

working position C.

AHold down the button 1 and tilt the swivel head 2 by 90° (see 5. Operation “Tilting the swivel head” ).

B Hold down the button 3 and	B
rotate the cutting unit 4 to the
0° position (see 5. Operation
“Rotating the cutting unit by 90°” ).

CHold down the button 1 and tilt the swivel head 2 to 0°.

vPush the hand guard 5 onto the

swivel head 2 until the snap-on	C
fittings engage.

4. Initial Operation

Charging the battery:

WARNING !

AOvervoltage damages batteries and the battery charger.

VEnsure the correct mains voltage.

Before using for the first time, the battery must be fully charged. Charging time (for uncharged battery) see 10. Technical Data.

The lithium-ion battery can be charged in any state of charge, and the charging process can be interrupted at any time without harming the battery (no memory effect).

In order that the fully charged battery does not self-discharge via the charger, it should be disconnected from the charger after charging.

16