ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure that the weight system can be assembled suc- cessfully by almost anyone. By setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•To hire an authorized service technician to assemble the weight system in your home, call
•Assembly requires two persons.
•Because of its weight and size, the weight sys- tem should be assembled in the location where it will be used. Make sure that there is enough clearance to walk around the weight system as you assemble it.
•To make assembly as easy as possible, we have divided the assembly process into four stages. The parts needed for each stage are found in individual hardware kits. Place all parts of the weight system in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•For help identifying small parts, use the PART IDENTIFICATION CHART on pages
•As you assemble the weight system, make sure that all parts are oriented as shown in the draw- ings.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•Assembly requires the included hex key and grease and the following tools (not included):
Two adjustable wrenches
One rubber mallet
One standard screwdriver
One Phillips screwdriver
Assembly will be more convenient if you have a socket set, a set of
The Four Stages of the Assembly Process
Frame | Cable |
the base and the uprights that form the skeleton of | attach the cables and pulleys that connect the |
the weight system. | arms to the weights. |
Arm | Seat |
assemble the arms and the leg lever. | assemble the seat and the backrest. |
|
|
8
