Gold's Gym GGSY3058.0 manual

21. Wrap the Butterfly Cable (50) under a 90mm	21
Pulley (48). Attach the Pulley and two Half
Guards (55) to the Double “U”-bracket (61) with
an M10 x 45mm Bolt (86) and an M10 Nylon
Locknut (77). Make sure that the Half Guards		50
are oriented as shown.
	48	77
	86	55
	55	61

22.Wrap the Butterfly Cable (50) over a “V”-pulley (47). Attach the “V”-pulley, a Long Cable Trap (57), an M10 Washer (80), and two Guards (54) to the Upright (2) with an M10 x 60mm Bolt (79) and an M10 Nylon Locknut (77).

23.Grease an M8 x 22mm Shoulder Bolt (90). Attach the Butterfly Cable (50) to the Right Butterfly Arm (29) with the Shoulder Bolt and an M8 Nylon Locknut (78). See the inset drawing. Make sure that the flat edge of the Cable is against the Right Butterfly Arm.

16

22	54
	79	57
		50
	47
	80
	54	2
		77
23
	90	50
	Grease
		78
	29

Flat Edge