![](/images/new-backgrounds/1183000/18300045x1.webp)
42.Attach the Backrest (31) to the Backrest Frame
(7) with two M6 x 20mm Screws (88), an M6 x 38mm Screw (89), and an M6 Washer (114).
Insert the Backrest Frame (7) into the Upright (2) and tighten the Backrest Adjustment Knob (53) into the Upright. Make sure that the Adjustment
Knob passes through one of the holes in the Backrest Frame.
43.Attach the Seat (32) to the Seat Frame (8) with two M6 x 20mm Screws (88), an M6 x 38mm Screw (89), and an M6 Washer (114).
Insert the Seat Frame (8) into the Frame (9). Tighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame. Make sure that the
Adjustment Knob passes through one of the holes in the Seat Frame.
44.Insert a Pad Tube (13) through the indicated hole in the Front Leg (10). Slide a Foam Pad (36) onto each end of the Pad Tube.
Press a Pad Cap (37) into an end of each Foam Pad (36).
Repeat this step for the other Pad Tube (13) and the Leg Lever (12). Note: Lift the Leg Lever Cable (51) when inserting a Pad Tube through through the hole in the bottom of the Leg Lever.
42 | 88 | |
7 | ||
| ||
31 |
| |
| 2 | |
| 53 | |
114 | 89 | |
| ||
43 |
| |
32 |
| |
8 | 114 | |
89 | ||
| ||
88 |
| |
9 | 52 | |
44 |
| |
37 | 10 | |
36 | ||
| ||
12 |
| |
| 13 | |
51 |
| |
13 | 36 | |
| ||
| 37 |
23