![](/images/new-backgrounds/1183000/18300041x1.webp)
36.Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Upright (2) with an M10 x 120mm Bolt (115), two Half Guards (55), an M10 Washer (80), and a Cable Trap (56).
37.Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Right Press Arm (16) with an M10 x 50mm Bolt (97), two Half Guards (55), a Cable Trap (56), an M10 Washer (80), and an M10 Nylon Locknut (77). Make sure that the Cable Trap and the Half Guards are oriented as shown.
38.Wrap the Leg Lever Cable (51) around a
36 |
| |
115 | 2 | |
80 48 | ||
51 | ||
56 |
| |
55 |
| |
55 |
|
37 |
|
|
55 |
| 51 |
80 | ||
77 |
| 55 97 |
48 |
|
|
56 | 16 |
|
38 |
| 2 |
55 |
| |
57 | 77 | |
47 |
| |
|
| |
80 |
|
|
55 |
|
|
51 |
| |
|
| 113 |
21