Husqvarna 536LiHD70X, 536LiHD60X manual Working Techniques

Page 18

WORKING TECHNIQUES

•Do not rush the work, but work steadily until all the branches have been cut back cleanly.

•The hedge trimmer’s rear handle can be set in ﬁve positions by pulling out the catch. See ﬁgure. When the handle is adjusted, the cutting attachment must not be running.

•Turn the handle by releasing the power trigger, pull out the lock for the handle and turn the handle.

•While working the handle should always be facing upwards irrespective of how the hedge trimmer is directed.

18 – English

Image 18

Contents 536LiHD60X 536LiHD70X Symbols on the battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manualHusqvarna de type BLi Contents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions General power tool safety warningsBattery tool use and care ServiceHedge trimmer safety warnings Personal safety Battery and battery charger Personal protective equipmentBattery safety Battery charger safetyMachine′s safety equipment Power trigger lockoutControl panel Hand guard Blade and blade guardFitting the end protection on the cutting deck Battery Handling Battery statusBattery charger Disposal of the battery, battery charger and machine Transport and storageCheck before starting Connect battery to the machineStarting and Stopping Starting and stoppingWorking Techniques General working instructionsSafety instructions after completing work Basic working techniquesWorking Techniques Cleaning and lubrication MaintenanceInspection and maintenance CleaningBattery charger Troubleshooting scheduleBattery LED display Possible faults Possible actionMaintenance schedule Maintenance Before use Weekly MonthlyTechnical Data Technical dataEC Declaration of Conformity Applies to Europe only EN 60745-1, EN 60745-2-15, EN 62133, EN1155453-26