Husqvarna 326R Fitting the blade guard and saw blade, Fit the drive disc B on the output shaft

Page 13

ASSEMBLY

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support flange

(F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

Fitting the blade guard and saw blade

K

J

H

I

A

L

•Remove the mounting plate (H). Fit the adapter (I) and bracket (J) with the two screws (K) as shown. Fit the blade guard (A) to the adapter using the 4 screws (L) as shown.

CAUTION! Use the recommended blade guard. See the Technical data section.

G

F

D

B

C

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D) and support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade.You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 326RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lockout Vibration damping system Cutting attachment guardQuick release MufflerLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Trimmer head Sharpening the saw bladeFitting the handlebar AssemblyTransport position, handlebar Assembling the cutting equipmentFit the drive disc B on the output shaft Fitting the blade guard and saw bladeFitting other guards and cutting attachments Standard harness Adjusting the harness and clearing sawSpreading the load on your shoulders Correct heightFuel Handling Fuel safetyFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping For throttle handles with a start throttle lockWorking Techniques Basic safety rulesGeneral working instructions ABC of clearingWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headCarburetor MaintenanceAdjusting the start throttle speed Correctly adjusted carburetorHigh speed jet H Cooling system MufflerBevel gear Air filter Cleaning the air filterSpark plug Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataMANUFACTURER′S Warranty Coverage Super Auto Page S35 ´z+RC=¶5v¨ T35 1150352-95 ´z+RC=¶5v¨ ´z+RC=¶5v¨

326R specifications

The Husqvarna 326R is a robust and versatile brushcutter designed for both professional landscapers and avid gardeners. Built with advanced technology and user-friendly features, this powerful tool excels in clearing heavy brush, maintaining grassy areas, and performing various landscaping tasks with precision.

One of the standout features of the Husqvarna 326R is its powerful 25.4cc, two-stroke engine. This engine delivers a high power-to-weight ratio, ensuring that users can tackle tough jobs without being weighed down. The engine is designed for ease of starting, thanks to its Smart Start system, which minimizes resistance in the starter cord. This means that the 326R starts effortlessly, allowing users to get to work quickly.

The ergonomic design of the 326R enhances user comfort during extended periods of operation. It features a balanced body that reduces strain on the arms and back, making it ideal for long hours of use. Additionally, the brushcutter is equipped with a comfortable harness and padded handles, ensuring that operators can maneuver the tool with ease.

Another significant aspect of the 326R is its cutting performance. It has a cutting width of 43 cm (17 inches), which provides an excellent balance between a wide cutting path and maneuverability in tight spaces. The brushcutter comes with a 4-tooth grass blade as well as a trimmer head, giving users the flexibility to switch between tasks efficiently.

Husqvarna has integrated advanced technologies into the 326R, including the LowVib system, which significantly reduces vibrations caused by the engine. This feature not only enhances comfort but also reduces fatigue during prolonged usage. Coupled with the air injection technology, which helps to keep the air filter cleaner for longer, the 326R ensures that maintenance remains low while performance stays high.

The lightweight design of the Husqvarna 326R also contributes to its ease of use. Weighing only approximately 5.5 kg (12.1 lbs), it can be easily carried and maneuvered around various terrains, making it suitable for different outdoor tasks.

Overall, the Husqvarna 326R is an exceptional brushcutter that combines power, efficiency, and user-friendly features, making it a top choice for anyone looking to maintain their property's landscape effectively. Whether trimming grass, clearing weeds, or overcoming thick brush, this versatile tool stands out in the competitive market of landscaping equipment.
Top Page Image Contents