Husqvarna 326R manual Locking nut

Page 9

GENERAL SAFETY PRECAUTIONS

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor screen this must be cleaned regularly. A blocked screen will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

!converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin. Remember the risk of fire!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

!The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.) Tighten the nut using the socket spanner.

When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade. You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 326RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsMachine′s safety equipment Stop switchThrottle lockout Vibration damping system Cutting attachment guardQuick release MufflerLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Trimmer head Sharpening the saw bladeFitting the handlebar AssemblyTransport position, handlebar Assembling the cutting equipmentFit the drive disc B on the output shaft Fitting the blade guard and saw bladeFitting other guards and cutting attachments Standard harness Adjusting the harness and clearing sawSpreading the load on your shoulders Correct heightFuel safety Fuel HandlingFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping For throttle handles with a start throttle lockWorking Techniques Basic safety rulesGeneral working instructions ABC of clearingWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headCarburetor MaintenanceCorrectly adjusted carburetor Adjusting the start throttle speedHigh speed jet H Muffler Cooling systemBevel gear Air filter Cleaning the air filterSpark plug Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataMANUFACTURER′S Warranty Coverage Super Auto Page S35 ´z+RC=¶5v¨ T35 1150352-95 ´z+RC=¶5v¨ ´z+RC=¶5v¨

326R specifications

The Husqvarna 326R is a robust and versatile brushcutter designed for both professional landscapers and avid gardeners. Built with advanced technology and user-friendly features, this powerful tool excels in clearing heavy brush, maintaining grassy areas, and performing various landscaping tasks with precision.

One of the standout features of the Husqvarna 326R is its powerful 25.4cc, two-stroke engine. This engine delivers a high power-to-weight ratio, ensuring that users can tackle tough jobs without being weighed down. The engine is designed for ease of starting, thanks to its Smart Start system, which minimizes resistance in the starter cord. This means that the 326R starts effortlessly, allowing users to get to work quickly.

The ergonomic design of the 326R enhances user comfort during extended periods of operation. It features a balanced body that reduces strain on the arms and back, making it ideal for long hours of use. Additionally, the brushcutter is equipped with a comfortable harness and padded handles, ensuring that operators can maneuver the tool with ease.

Another significant aspect of the 326R is its cutting performance. It has a cutting width of 43 cm (17 inches), which provides an excellent balance between a wide cutting path and maneuverability in tight spaces. The brushcutter comes with a 4-tooth grass blade as well as a trimmer head, giving users the flexibility to switch between tasks efficiently.

Husqvarna has integrated advanced technologies into the 326R, including the LowVib system, which significantly reduces vibrations caused by the engine. This feature not only enhances comfort but also reduces fatigue during prolonged usage. Coupled with the air injection technology, which helps to keep the air filter cleaner for longer, the 326R ensures that maintenance remains low while performance stays high.

The lightweight design of the Husqvarna 326R also contributes to its ease of use. Weighing only approximately 5.5 kg (12.1 lbs), it can be easily carried and maneuvered around various terrains, making it suitable for different outdoor tasks.

Overall, the Husqvarna 326R is an exceptional brushcutter that combines power, efficiency, and user-friendly features, making it a top choice for anyone looking to maintain their property's landscape effectively. Whether trimming grass, clearing weeds, or overcoming thick brush, this versatile tool stands out in the competitive market of landscaping equipment.
Top Page Image Contents