Husqvarna 326R manual Air filter, Spark plug, Cleaning the air filter, Oiling the air filter

Page 27

MAINTENANCE

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts

•Excessive fuel consumption.

Clean the filter every 25 hours, or more regularly if conditions are exceptionally dusty.

Cleaning the air filter

Remove the air filter cover and take out the filter. Wash it clean in warm, soapy water. Ensure that the filter is dry before refitting it.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter must always be replaced.

If the machine is used in dusty conditions the air filter should be soaked in oil. See instructions under the heading Oiling the air filter.

Oiling the air filter

Always use HUSQVARNA filter oil, art. no. 531 00 92-48. The filter oil contains a solvent to make it spread evenly through the filter. You should therefore avoid skin contact.

Put the filter in a plastic bag and pour the filter oil over it. Knead the plastic bag to distribute the oil. Squeeze the excess oil out of the filter inside the plastic bag and pour off the excess before fitting the filter to the machine. Never use common engine oil. This would drain through the filter quite quickly and collect in the bottom.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.

Note:

Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by

HUSQVARNA.

English – 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 326RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsMachine′s safety equipment Stop switchThrottle lockout Muffler Cutting attachment guardVibration damping system Quick releaseLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Trimmer head Sharpening the saw bladeAssembling the cutting equipment AssemblyFitting the handlebar Transport position, handlebarFit the drive disc B on the output shaft Fitting the blade guard and saw bladeFitting other guards and cutting attachments Correct height Adjusting the harness and clearing sawStandard harness Spreading the load on your shouldersFuel safety Fuel HandlingFuel Mixing FuelingStarting Starting and StoppingCheck before starting Starting and stoppingStopping For throttle handles with a start throttle lockABC of clearing Basic safety rulesWorking Techniques General working instructionsWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headCarburetor MaintenanceCorrectly adjusted carburetor Adjusting the start throttle speedHigh speed jet H Muffler Cooling systemBevel gear Oiling the air filter Cleaning the air filterAir filter Spark plugMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataMANUFACTURER′S Warranty Coverage Super Auto Page S35 ´z+RC=¶5v¨ T35 1150352-95 ´z+RC=¶5v¨ ´z+RC=¶5v¨

326R specifications

The Husqvarna 326R is a robust and versatile brushcutter designed for both professional landscapers and avid gardeners. Built with advanced technology and user-friendly features, this powerful tool excels in clearing heavy brush, maintaining grassy areas, and performing various landscaping tasks with precision.

One of the standout features of the Husqvarna 326R is its powerful 25.4cc, two-stroke engine. This engine delivers a high power-to-weight ratio, ensuring that users can tackle tough jobs without being weighed down. The engine is designed for ease of starting, thanks to its Smart Start system, which minimizes resistance in the starter cord. This means that the 326R starts effortlessly, allowing users to get to work quickly.

The ergonomic design of the 326R enhances user comfort during extended periods of operation. It features a balanced body that reduces strain on the arms and back, making it ideal for long hours of use. Additionally, the brushcutter is equipped with a comfortable harness and padded handles, ensuring that operators can maneuver the tool with ease.

Another significant aspect of the 326R is its cutting performance. It has a cutting width of 43 cm (17 inches), which provides an excellent balance between a wide cutting path and maneuverability in tight spaces. The brushcutter comes with a 4-tooth grass blade as well as a trimmer head, giving users the flexibility to switch between tasks efficiently.

Husqvarna has integrated advanced technologies into the 326R, including the LowVib system, which significantly reduces vibrations caused by the engine. This feature not only enhances comfort but also reduces fatigue during prolonged usage. Coupled with the air injection technology, which helps to keep the air filter cleaner for longer, the 326R ensures that maintenance remains low while performance stays high.

The lightweight design of the Husqvarna 326R also contributes to its ease of use. Weighing only approximately 5.5 kg (12.1 lbs), it can be easily carried and maneuvered around various terrains, making it suitable for different outdoor tasks.

Overall, the Husqvarna 326R is an exceptional brushcutter that combines power, efficiency, and user-friendly features, making it a top choice for anyone looking to maintain their property's landscape effectively. Whether trimming grass, clearing weeds, or overcoming thick brush, this versatile tool stands out in the competitive market of landscaping equipment.
Top Page Image Contents