Husqvarna 326R manual Fitting other guards and cutting attachments

Page 14

ASSEMBLY

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft.

•Fit the nut (G). Tighten the nut to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Grasp the handle of the spanner as close to the trimmer guard as possible.

•To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

Fitting other guards and cutting attachments

•Fit the trimmer guard/combination guard (A) intended for use with the trimmer head/plastic blades. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

A

M

L B

C

•To dismantle, follow the instructions in the reverse order.

•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.

H

H

•To dismantle, follow the instructions in the reverse order.

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 326RX-series KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch Quick release Cutting attachment guardVibration damping system MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment Sharpening the saw blade Trimmer headTransport position, handlebar AssemblyFitting the handlebar Assembling the cutting equipmentFitting the blade guard and saw blade Fit the drive disc B on the output shaftFitting other guards and cutting attachments Spreading the load on your shoulders Adjusting the harness and clearing sawStandard harness Correct heightFuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting StartingFor throttle handles with a start throttle lock StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingMaintenance CarburetorHigh speed jet H Correctly adjusted carburetorAdjusting the start throttle speed Bevel gear MufflerCooling system Spark plug Cleaning the air filterAir filter Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataMANUFACTURER′S Warranty Coverage Super Auto Page S35 ´z+RC=¶5v¨ T35 1150352-95 ´z+RC=¶5v¨ ´z+RC=¶5v¨

326R specifications

The Husqvarna 326R is a robust and versatile brushcutter designed for both professional landscapers and avid gardeners. Built with advanced technology and user-friendly features, this powerful tool excels in clearing heavy brush, maintaining grassy areas, and performing various landscaping tasks with precision.

One of the standout features of the Husqvarna 326R is its powerful 25.4cc, two-stroke engine. This engine delivers a high power-to-weight ratio, ensuring that users can tackle tough jobs without being weighed down. The engine is designed for ease of starting, thanks to its Smart Start system, which minimizes resistance in the starter cord. This means that the 326R starts effortlessly, allowing users to get to work quickly.

The ergonomic design of the 326R enhances user comfort during extended periods of operation. It features a balanced body that reduces strain on the arms and back, making it ideal for long hours of use. Additionally, the brushcutter is equipped with a comfortable harness and padded handles, ensuring that operators can maneuver the tool with ease.

Another significant aspect of the 326R is its cutting performance. It has a cutting width of 43 cm (17 inches), which provides an excellent balance between a wide cutting path and maneuverability in tight spaces. The brushcutter comes with a 4-tooth grass blade as well as a trimmer head, giving users the flexibility to switch between tasks efficiently.

Husqvarna has integrated advanced technologies into the 326R, including the LowVib system, which significantly reduces vibrations caused by the engine. This feature not only enhances comfort but also reduces fatigue during prolonged usage. Coupled with the air injection technology, which helps to keep the air filter cleaner for longer, the 326R ensures that maintenance remains low while performance stays high.

The lightweight design of the Husqvarna 326R also contributes to its ease of use. Weighing only approximately 5.5 kg (12.1 lbs), it can be easily carried and maneuvered around various terrains, making it suitable for different outdoor tasks.

Overall, the Husqvarna 326R is an exceptional brushcutter that combines power, efficiency, and user-friendly features, making it a top choice for anyone looking to maintain their property's landscape effectively. Whether trimming grass, clearing weeds, or overcoming thick brush, this versatile tool stands out in the competitive market of landscaping equipment.
Top Page Image Contents