Husqvarna 326HDA55X-Series, 326HE3X-Series, 326HE4X-Series Vibration damping system, Muffler

Page 5

SAFETY INSTRUCTIONS

4. Vibration damping system

The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibra- tion-free and comfortable use as possible.

The hedge trimmer’s vibration damping system reduces the transfer of vibrations between the engine unit/blades and the hedge trimmer’s handles. The engine body including the blades is suspended on the handlebar system via a four springs.

!WARNING!

Over exposure to vibrations can result in blood-vessel or nerve injury to persons suffering with blood circulation problems. Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples of such symptoms are ”numbness”, lack of feeling, ”tickling”, ”pricking”, ”pain”, lack of or a reduction in normal strength, changes in the colour of the skin or its surfaces. These symptoms normally appear in the fingers, hands or wrists.

5. Muffler

The muffler is designed to give

the lowest possible noise level and to direct the engine‘s

exhaust fumes away from the operator. Muffler fitted with

catalytic converter is also

designed to reduce harmful exhaust components. In countries that have a warm and dry climate the risk of fire

is obvious. We have therefore

fitted certain mufflers with a

spark arrest screen. Make sure that your muffler is fitted with

this kind of screen. It is

extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (See the section “Control, maintenance and service of the machine‘s safety equipment“.)

!WARNING!

Mufflers fitted with catalytic converters become extremely hot during use and after stopping. This also applies at idling speeds. Contact can result in burns to the skin. Be observant to the risk of fire!

!WARNING!

Bear in mind that exhaust fumes:

contain carbon monoxide, which can cause carbon monoxide poisoning. Therefore never start or run the machine indoors.

are hot and can contain sparks that can cause fires. Never start the machine indoors or close to inflammable material.

6.Blade guard (326HDA55)

The blade guard (A) is intended to protect against any part of the body coming into contact with the blades

(B).

A

B

English – 5

Image 5
Contents 326HDA55X-series Symbols Symbol ExplanationContents Machine’s protective equipment Safety InstructionsPersonal protective eqipment Blade guard 326HDA55 Vibration damping systemMuffler Hand guard 326HDA55, 326HE3 Gearbox BladesFuel safety General safety instructionsStart Transport and storagePersonal protection Safety instructions when using the hedge trimmerProtective instructions regarding the surroundings Protective instructions while workingBasic working techniques Protective instructions when work is completedChanging the hedge trimmer angle 326HE3, 326HE4 326HDA55What is what on the hedge trimmer? What is WHAT?Fitting the angle adjuster 326HE3/ 326HE4 AssemblyAdjusting the harness 326HE4 Fitting the cutting attachmentFuelling Fuel HandlingFuel Control before starting Start and StopStart and stop StopCarburettor MaintenanceHigh speed needle H Correctly adjusted carburettor Adjusting the idle speed, TSpark plug MufflerCooling system Cleaning the air filter Cleaning and lubricationAir filter GearboxDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data 326HDA55 326HE3 326HE4 Technical DataEmission Control Warranty Statement ´+H¶3~¨ Page 2001W51 114 00