Husqvarna 326ES manual Emission Warranty Parts List

Page 29

FEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT

EMISSION WARRANTY PARTS LIST

1Carburetor and internal parts

2Intake pipe, airfilter holder and carburetor bolts.

3Airfilter and fuelfilter covered up to maintenance schedule.

4Spark Plug, covered up to maintenance schedule

5Ignition Module

6Muffler with catalytic converter

7Fuel tank

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

Add-on or modified parts that are not exempted by CARB or EPA may not be used. The use of any non-exempted add-on or modified parts will be grounds for disallowing a warranty claim. Husqvarna Forest & Garden will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified part.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800-487-5963.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs are provided through all

Husqvarna Forest & Garden authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND

REPAIR OF EMISSION-RELATED PARTS

Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce the warranty obligations of the manufacturer.

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as defined in the operator’s manual.

1151020-95 Rev. 2 2008-03-10

English 29

Image 29
Contents 326ES 326EX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? 326Ex What is WHAT?What is what? 326ES Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentVibration damping system Stop switchCutting attachment guard Cutting equipment MufflerLocking screw 326ES Locking nut 326ExFitting the loop handle AssemblyAssembling the angle gear 326Ex Assembling the angle gear 326ESAssembling the blade 326ES Assembling the cutting equipmentAssembling the blade 326Ex Fuel Fuel safetyFuel Handling Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping General working instructions Working TechniquesBasic working techniques Safety instructions while workingSafety instructions after completing work Carburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TLow speed jet L High speed jet HSpark plug MufflerCooling system Air filter Cleaning the air filterAngle gear 326Ex 326ESLubricating the flexible drive shaft 326Ex Adjusting the edger’s cutting depth 326ExAdjusting the edger’s cutting depth 326ES Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Emission Warranty Parts List Page Page 1151020-95