Husqvarna 335RJ, 335RJX-Series manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

A protective helmet where there is a risk of falling objects

Approved hearing protection

Approved eye protection

Max. speed of output shaft, rpm

This product is in accordance with applicable EC directives.

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.

Machines fitted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord.

15 m 50FT

15 m 50FT

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

1.

2.

3.

Starting instructions

4.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

The engine is switched off by moving the

stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap

must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2 – English

Image 2
Contents 333RJ 335RJX-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentThrottle lock Machine′s safety equipmentStop switch Muffler Cutting attachment guardVibration damping system Cutting equipment Cutting equipmentLocking nut Sharpening grass cutters and grass blades Trimmer headAssembling the cutting equipment AssemblyFitting the J-handle Fitting the guard extensionHook the blade guard/combination guard a onto Fuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping General working instructions Basic safety rulesWorking Techniques Basic working techniquesGrass clearing using a grass blade Grass trimming with a trimmer headMaintenance CarburettorMuffler Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HBevel gear Cleaning the air filterCooling system Air filterSpark plug Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe onlyPage S35 095-.106 T35 ´z+R3,¶6/¨ Page 1150191-26 ´z+R3,¶6/¨ ´z+R3,¶6/¨