Husqvarna 335RJ, 335RJX-Series manual Maintenance schedule, Maintenance Daily Weekly Monthly

Page 23

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s Manual. More extensive work must be carried out by an authorised service workshop.

	Maintenance	Daily		Weekly	Monthly
	Maintenance	maintenance		maintenance	maintenance
		maintenance		maintenance	maintenance

	Clean the outside of the machine.		X

	Make sure the throttle trigger lock and the throttle function correctly from a		X
	safety point of view.		X
	safety point of view.

	Check that the stop switch works correctly.		X

	Check that the cutting attachment does not rotate at idle.		X

	Clean the air ﬁlter. Replace if necessary.		X

	Check that the guard is undamaged and not cracked. Replace the guard if		X
	it has been exposed to impact or is cracked.		X
	it has been exposed to impact or is cracked.

	Check that the trimmer head is undamaged and not cracked. Replace the		X
	trimmer head if necessary.		X
	trimmer head if necessary.

	Check that the locking nut of the cutting equipment is tighten correctly.		X

	Check that nuts and screws are tight.		X

	Check that there are no fuel leaks from the engine, tank or fuel lines.		X

	Check the starter and starter cord.			X

	Check that the vibration damping elements are not damaged.			X

	Clean the outside of the spark plug. Remove it and check the electrode
	gap. Adjust the gap to 0.5 mm or replace the spark plug. Check that the			X
	spark plug is ﬁtted with a suppressor.

	Clean the machines cooling system.			X

	Clean or replace the spark arrestor mesh on the mufﬂer (only applies to			X
	mufﬂers without a catalytic converter).			X
	mufﬂers without a catalytic converter).

	Clean the outside of the carburettor and the space around it.			X

	Check that the bevel gear is ﬁlled three-quarters full with lubricant. Fill if			X
	necessary using special grease.			X
	necessary using special grease.

	Check the fuel ﬁlter from contamination and the fuel hose from cracks or				X
	other defects. Replace if necessary.				X
	other defects. Replace if necessary.

	Check all cables and connections.				X

	Check the clutch, clutch springs and the clutch drum for wear. Replace if				X
	necessary by an autorized service workshop.				X
	necessary by an autorized service workshop.

	Replace the spark plug. Check that the spark plug is ﬁtted with a				X
	suppressor.				X
	suppressor.

	Check and clean the spark arrestor mesh on the mufﬂer (only applies to				X
	mufﬂers ﬁtted with a catalytic converter).				X
	mufﬂers ﬁtted with a catalytic converter).

English – 23

Image 23

Contents 333RJ 335RJX-series Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lock Machine′s safety equipmentStop switch Mufﬂer Cutting attachment guardVibration damping system Cutting equipment Cutting equipmentLocking nut Trimmer head Sharpening grass cutters and grass bladesFitting the guard extension AssemblyFitting the J-handle Assembling the cutting equipmentHook the blade guard/combination guard a onto Fuel Fuel safetyFuel Handling Mixing FuellingStarting Starting and StoppingCheck before starting Starting and stoppingStopping Basic working techniques Basic safety rulesWorking Techniques General working instructionsGrass trimming with a trimmer head Grass clearing using a grass bladeCarburettor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburettor MufﬂerAir ﬁlter Cleaning the air ﬁlterCooling system Bevel gearSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApplies to Europe only EC-declaration of conformityPage S35 095-.106 T35 ´z+R3,¶6/¨ Page 1150191-26 ´z+R3,¶6/¨ ´z+R3,¶6/¨