Husqvarna 225E manual Vibration damping system, Muffler, Cutting equipment, Locking nut

Page 5

SAFETY INSTRUCTIONS

4.Vibration damping system

Your machine is equipped with a vibration damping system, which is designed to give as vibration-free and comfortable use as possible.

The use of incorrect cutting equipment increases the level of vibration.

The machine‘s vibration damping system reduces the transfer of vibrations between the engine unit/ cutting equip- ment and the machine‘s handles. The engine body including the cutting equipment is suspended on the handlebar system via a vibration damping element.

WARNING!

Over exposure to vibrations can result in

blood-vessel or nerve injury to persons

! suffering with blood circulation problems.

Seek medical attention if you experience

physical symptoms that can be related to

over exposure to vibrations. Examples of

such symptoms are “numbness“, lack of

feeling, “tickling“, “pricking“, “pain“ lack of

or a reduction in normal strength, changes in

the colour of the skin or its surfaces. These

symptoms normally appear in the fingers,

hands or wrists.

5. Muffler

The muffler is designed to give the lowest possible noise level and to direct the engine‘s exhaust fumes away from the operator. Muffler fitted with catalytic converter is also designed to reduce harmful exhaust components.

In countries that have a warm and dry climate the risk of fire is obvious. We have therefore fitted certain mufflers with a spark arrest screen. Make sure that your muffler is fitted with this kind of screen.

It is extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (see the section “Control, maintenance and service of the machine‘s safety equipment“).

!WARNING!

The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

!WARNING!

Mufflers fitted with catalytic converters become extremely hot during use and after stopping. This also applies at idling speeds. Contact can result in burns to the skin. Be observant to the risk of fire!

6. Cutting equipment

The blade is designed and machined for coping with the wear that cutting the edges of lawns involves.

7. Locking nut

The locking nut secures the cutting equipment on the output shaft.

English – 5

Image 5
Contents 101 89 225ESymbols Symbol ExplanationContents Personal protective equipment Safety InstructionsMachine‘s safety equipment Muffler Vibration damping systemCutting equipment Locking nutSafety Instructions Safety Instructions Safety instructions regarding the surroundings General safety instructionsSafety instructions before starting work Personal protectionTransport and storage Fuel safetyStart General working instructions Basic working techniques Safety instruction while workingBasic safety precautions Safety instructions after completing work What is what on the edger? What is WHAT?Assembling the angle gear AssemblyAssembling the blade Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Carburetor MaintenanceHigh speed needle H Correctly adjusted carburetor Final setting of the idling speed TAir filter Cleaning the air filterMuffler with catalytic converter Cooling system Spark plug Lubricating the flexible drive axle Adjusting the edger‘s cutting depth Angle gearDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenance225E Technical DataTechnical data «*2¥5$¬ English «*2¥5$¬