Husqvarna 125LDx Starting and Stopping, Check before starting, Starting and stopping, Cold engine

Page 12

STARTING AND STOPPING

Check before starting

WARNING: When the engine is started with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

SNever start the machine indoors. Exhaust

fumes can be dangerous if inhaled.

SObserve your surroundings and make sure that there is no risk of people or

animals coming into contact with the cutting equipment.

SPlace the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

SCheck that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

SNever use the machine without a guard nor with a defective guard.

Starting and stopping

WARNING: The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come loose and cause personal injury.

Always move the machine away from the refueling area before starting. Place the machine on a flat surface. Ensure the cutting at- tachment cannot come into contact with any object.

Make sure no unauthorized persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 meters.

Cold engine

Primer bulb: Press the primer bulb 10 times until fuel begins to fill the bulb. The primer bulb need not be completely filled.

Choke: Move the blue engine choke lever over to the closed position.

Starting

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!).

Firmly grip the starter rope handle with your right hand. DO NOT squeeze throttle trigger. Slowly pull out the cord until you feel some resistance (the starter pawls grip); then quickly and powerfully pull the cord.

Never wrap the starter cord around your hand.

Repeat pulling the cord until the engine attempts to start. Squeeze throttle trigger to release the choke. Continue to hold throttle trigger and pull starter rope until engine runs.

12

Image 12
Contents LDx Symbol Explanation SymbolsAlways wear Contents What is WHAT? Know your trimmerPrimer bulb Upper shaft Air filter cover Lower shaftGeneral Safety Precautions Wear anti--slip and stable bootsPersonal protective equipment Machine’s safety equipment Stop switchThrottle lock Cutting attachment guard MufflerCutting equipment Trimmer headMake sure that the cutter on the trimmer Assembly Fitting the loop handle Assembling and dismantling the two--piece shaft Fitting the trimmer guard and trimmer headFuel safety Fuel HandlingFuel Operating problems FuellingMixing Add the remaining amount of petrolStarting and Stopping Check before startingStarting and stopping Cold engineWarm engine StoppingThis can damage the machine Basic safety rules Working TechniquesGeneral working instructions Basic working techniquesClearing CuttingSweeping Stop the machine immediately if anyone approachesMaintenance Unit/Maintenance SafetyCarburetor MufflerCleaning the air filter Loss of engine powerSpark plug Two--piece shaftBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataDeclaration of Conformity Model 125LDx M10 LH arbor shaft threadAttachments Part. no 952 715Trimmer Head Line Loading Instructions Plastic Blades Tri Cut