Husqvarna 125LDx manual Bevel gear

Page 18

MAINTENANCE

Bevel gear

The bevel gear is filled with the right quan- tity of grease at the factory. However, be- fore using the machine you should check that the bevel gear is filled three--quarters full with grease. Use HUSQVARNA special grease.

The grease in the bevel gear does not nor- mally need to be changed except if repairs are carried out.

Image 18

Contents LDx Symbol Explanation SymbolsAlways wear Contents Primer bulb What is WHAT?Know your trimmer Upper shaft Air filter cover Lower shaftGeneral Safety Precautions Wear anti--slip and stable bootsPersonal protective equipment Machine’s safety equipment Stop switchThrottle lock Cutting attachment guard MufflerCutting equipment Trimmer headMake sure that the cutter on the trimmer Assembling and dismantling the two--piece shaft AssemblyFitting the loop handle Fitting the trimmer guard and trimmer headFuel safety Fuel HandlingFuel Mixing Operating problemsFuelling Add the remaining amount of petrolStarting and stopping Starting and StoppingCheck before starting Cold engineWarm engine StoppingThis can damage the machine General working instructions Basic safety rulesWorking Techniques Basic working techniquesSweeping ClearingCutting Stop the machine immediately if anyone approachesCarburetor MaintenanceUnit/Maintenance Safety MufflerSpark plug Cleaning the air filterLoss of engine power Two--piece shaftBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataAttachments Part. no Declaration of ConformityModel 125LDx M10 LH arbor shaft thread 952 715Trimmer Head Line Loading Instructions Plastic Blades Tri Cut