Husqvarna 125LDx manual Symbol Explanation, Symbols, Always wear

Page 2

SYMBOL EXPLANATION

Symbols

WARNING: Clearing saws, brush- cutters and trimmers can be dan- gerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

SA protective helmet where there is a risk of falling objects

SHearing protection

SApproved eye protection

Max. speed of output shaft, rpm

Beware of thrown objects and ricochets.

The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres.

Arrows which show limits for handle mounting.

Always wear approved protective gloves.

Use anti--slip and stable boots.

Only use non--metallic, flexible cutting attachments, i.e. trimmer heads with trimmer line.

This product is in accordance with applicable EC directives.

Only intended for trimmer heads.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in the Technical data section and on label.

Use unleaded or quality leaded gasoline and two--stroke oil mixed at a ratio of 2% (1:50).

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Stop the engine by pushing and holding the stop switch

in the STOP position. CAUTION! The stop switch automatically returns to the start position.

In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents LDx Always wear Symbol ExplanationSymbols Contents Primer bulb What is WHAT?Know your trimmer Upper shaft Air filter cover Lower shaftPersonal protective equipment General Safety PrecautionsWear anti--slip and stable boots Throttle lock Machine’s safety equipmentStop switch Cutting attachment guard MufflerMake sure that the cutter on the trimmer Cutting equipmentTrimmer head Assembling and dismantling the two--piece shaft AssemblyFitting the loop handle Fitting the trimmer guard and trimmer headFuel Fuel safetyFuel Handling Mixing Operating problemsFuelling Add the remaining amount of petrolStarting and stopping Starting and StoppingCheck before starting Cold engineThis can damage the machine Warm engineStopping General working instructions Basic safety rulesWorking Techniques Basic working techniquesSweeping ClearingCutting Stop the machine immediately if anyone approachesCarburetor MaintenanceUnit/Maintenance Safety MufflerSpark plug Cleaning the air filterLoss of engine power Two--piece shaftBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataAttachments Part. no Declaration of ConformityModel 125LDx M10 LH arbor shaft thread 952 715Trimmer Head Line Loading Instructions Plastic Blades Tri Cut
Top Page Image Contents