Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 manual Assembly

Page 12

ASSEMBLY

Fitting the hand guard and loop handle (325HDA55/325HE3)

1.Assemble the hand guard and loop handle by screwing them together. Take care to

align the holes in both parts.

2. Slide the loop handle and the hand guard onto the shaft.

3. Slide the spacer into the slot in the loop handle.

4. Fit the nut and bolt. Do not over-tighten.

5.Adjust to give a comfortable working position. Tighten

the nut.

NOTE! The loop handle and hand guard must not be fitted behind the arrow marked on the shaft.

Fitting the angle adjuster (325HE3/325HE4)

1.Fit the angle adjuster over the two holes in the

cutting attachment. NOTE! The angle adjuster must be fitted on the side nearest the shaft.

2. Fit the two washers and short screws. Tighten the screws.

3.Fit the long screw, washers and knob.

Fitting the cutting attachment

Lay the hedge trimmer on a flat surface before fitting the cutting attachment. Other- wise the cutting attachment may not be fitted straight.

1.Fit the cutting attachment to the shaft. NOTE! Make sure the drive shaft on the shaft is aligned with the cut-out in the cutting attachment.

2.Tighten the lower screw, followed by the upper screw.

Adjusting the harness (325HE4)

You should always use the harness with the machine to give maximum control and reduce strain on your arms and back.

1. Put on the harness.

2.Hook the machine onto the hook on the harness.

3.Adjust the length of the harness so that the hook is roughly level with your right hip.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 325HDA55X-SERIES 114 00Symbol Explanation SymbolsContents Safety Instructions Personal protective eqipmentMachine’s protective equipment Vibration damping system MufflerBlade guard Hand guard Blades Blade guard 325HDA55Gearbox General safety instructions Fuel safetyStart Transport and storageSafety instructions when using the hedge trimmer Personal protectionProtective instructions regarding the surroundings Protective instructions while workingProtective instructions when work is completed Basic working techniquesChanging the hedge trimmer angle 325HE3, 325HE4 325HDA55What is WHAT? What is what on the hedge trimmer?Assembly Adjusting the harness 325HE4Fitting the cutting attachment Fuel Handling FuelFuelling Start and Stop Control before startingStart and stop StopMaintenance CarburettorAdjusting the idle speed, T High speed needle H Correctly adjusted carburettorMuffler Cooling systemSpark plug Cleaning the air filter Air filterGearbox LubricationMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical data325HDA55 325HE3 325HE4 Emission Control Warranty Statement Your Warranty Rights Obligations´+HÆe¶5d¨ Page 2001W10

325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 specifications

Husqvarna, a leading name in outdoor power equipment, offers a range of high-performance hedge trimmers designed to meet the needs of both professional landscapers and avid gardeners. Among their standout products are the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3. Each of these models is equipped with cutting-edge technology and exceptional features, making them suitable for a variety of trimming tasks.

The 325HDA55X-Series hedge trimmer is renowned for its robust performance and ergonomic design. It features a powerful X-Torq engine that reduces fuel consumption and emissions, promoting a more environmentally friendly operation. This model comes with a long, double-sided blade, ensuring efficient cutting of dense foliage with minimal effort. The low-vibration design minimizes operator fatigue, allowing for extended use without discomfort.

The 325HE3X-Series is another impressive offering by Husqvarna, particularly known for its versatility. This hedge trimmer includes an adjustable cutting head, allowing users to reach difficult angles and trim taller hedges with ease. With its lightweight construction, it is ideal for prolonged use, providing excellent maneuverability. The anti-vibration technology further enhances user comfort and control, making it suitable for both commercial and residential landscaping tasks.

Similarly, the 325HE4X-Series takes performance to the next level with its powerful engine and extended reach. Featuring a pole saw-like extension, it allows users to tackle high branches and tall hedges without the need for ladders. The efficient blade design ensures clean cuts, reducing the risk of plant damage. This model is particularly appreciated by professionals who require a tool that can efficiently handle larger pruning tasks.

Lastly, the 323HE3 hedge trimmer is designed for users seeking a lightweight, user-friendly option. It is equipped with a reliable engine that balances power, fuel efficiency, and durability. The compact design makes it easy to handle, even in tight spaces, while the double-sided blade allows for efficient vertical and horizontal trimming.

In conclusion, the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3 hedge trimmers showcase the company's commitment to innovation, comfort, and efficiency. With features like ergonomic designs, convenient reach adjustments, and advanced engine technology, these models cater to a wide range of trimming needs, making them essential tools for any landscaping professional or gardening enthusiast.
Top Page Image Contents