Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3

MAINTENANCE

Adjusting the idle speed, T

Adjust the idling speed with
Adjust the idling speed with
the screw T, if it is necessary
to readjust. First turn the
idle speed adjusting screw T
clockwise until the cutting
attachment starts to rotate/
move.
Then turn, counter-clock-
wise until the cutting		+ 1/4
wise until the cutting		+ 1/4
attachment stops. A correctly


adjusted idle speed setting
occurs when the engine runs
smoothly in every position.
smoothly in every position.
It should also be good
margin to the rpm when the	L
margin to the rpm when the	L
cutting attachment starts to
move.
move.

CAUTION! Contact your servicing dealer, if the idle speed setting cannot be adjusted so that the cutting attachment stops. Do not use the machine until it has been properly adjusted or repaired.

High speed needle H

Correctly adjusted carburettor

A correctly adjusted carburettor means that the machine accelerates without hesitation and the machine 4-cycles a little at max speed. Furthermore, the cutting attachment must not rotate/move at idling. A too lean adjusted low speed needle L may cause starting difficulties and bad acceleration.

A too lean adjusted high speed needle H gives lower power = less capacity, bad acceleration and/or damage to the engine. A too rich adjustment of the two speed needles L and H gives acceleration problems or too low working speed.

The high speed needle affects the machine’s power, speed, temperature and fuel consumption. A too lean adjustment on the high speed needle H (the high speed needle H is screwed in too much) gives a too high speed resulting in engine damage. Do not allow the engine to run at full speed for more than 10 seconds.

Apply full throttle and turn the high speed needle H slowly anticlockwise until the engine runs unevenly. The high speed needle H is then turned slowly clock- wise a little until the engine runs smoothly.

Note the engine should be run unloaded when adjusting the high speed needle. Therefore disman- tle the cutting equipment, nut, support flange and disc drive before adjusting the high speed needle. The high

speed needle is adjusted correctly when the machine ‘splatters’ a little . If the machine smokes heavily at the same time as it ‘splatters’ heavily the adjustment is too rich.

NOTE! For optimum setting of the carburettor, contact a qualified servicing dealer who has a revolution counter at his disposal.

16 – English

325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 specifications

Husqvarna, a leading name in outdoor power equipment, offers a range of high-performance hedge trimmers designed to meet the needs of both professional landscapers and avid gardeners. Among their standout products are the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3. Each of these models is equipped with cutting-edge technology and exceptional features, making them suitable for a variety of trimming tasks.

The 325HDA55X-Series hedge trimmer is renowned for its robust performance and ergonomic design. It features a powerful X-Torq engine that reduces fuel consumption and emissions, promoting a more environmentally friendly operation. This model comes with a long, double-sided blade, ensuring efficient cutting of dense foliage with minimal effort. The low-vibration design minimizes operator fatigue, allowing for extended use without discomfort.

The 325HE3X-Series is another impressive offering by Husqvarna, particularly known for its versatility. This hedge trimmer includes an adjustable cutting head, allowing users to reach difficult angles and trim taller hedges with ease. With its lightweight construction, it is ideal for prolonged use, providing excellent maneuverability. The anti-vibration technology further enhances user comfort and control, making it suitable for both commercial and residential landscaping tasks.

Similarly, the 325HE4X-Series takes performance to the next level with its powerful engine and extended reach. Featuring a pole saw-like extension, it allows users to tackle high branches and tall hedges without the need for ladders. The efficient blade design ensures clean cuts, reducing the risk of plant damage. This model is particularly appreciated by professionals who require a tool that can efficiently handle larger pruning tasks.

Lastly, the 323HE3 hedge trimmer is designed for users seeking a lightweight, user-friendly option. It is equipped with a reliable engine that balances power, fuel efficiency, and durability. The compact design makes it easy to handle, even in tight spaces, while the double-sided blade allows for efficient vertical and horizontal trimming.

In conclusion, the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3 hedge trimmers showcase the company's commitment to innovation, comfort, and efficiency. With features like ergonomic designs, convenient reach adjustments, and advanced engine technology, these models cater to a wide range of trimming needs, making them essential tools for any landscaping professional or gardening enthusiast.