Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 manual Maintenance schedule

Page 19

MAINTENANCE

Maintenance schedule

Below you will find some general maintenance instructions.

Daily maintenance

•Check throttle trigger and throttle trigger lockout function.

•Check stop switch function.

•Check that the blades do not rotate while idling or when the choke is in the start position.

•Clean the exterior of the machine.

• Check that the harness is undamaged.(325 HE4)

•Check the blade guard for damage or cracks.

•Change the guard in case of impacts or cracks.

•Check that the blade is properly centred, sharp, and without cracks.

•Check the hand guard for cracks and chips or damage. Replace if necessary.

•Check that the blade screws are sufficiently tightened.

•Make sure that the blade transport guard is undamaged and that it can be securely fitted.

•Check that nuts and screws are sufficiently tightened.

•Check for fuel leaks.

Weekly maintenance

•Check the starter, especially cord and return spring.

•Make sure that the vibration damping elements are not damaged.

•Clean the carburetor area.

•Clean the exterior of the spark plug.

•Remove it and check the electrode gap.

•Adjust it to 0,5 mm (.020"), or change the spark plug.

•Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.

•Fill the gearbox with grease. This should be carried out after approximately every 20 working hours.

•Clean the air filter.

•Clean or replace the muffler’s spark arrest screen (not on mufflers with a catalytic converter).

Monthly maintenance

•Clean the fuel tank.

•Clean the exterior of the carburetor and the space around it.

•Clean the fan and the space around it.

•Check fuel hose for cracks or other damage. Change if necessary.

•Change fuel filter in fuel tank.

•Check clutch, clutch spring and clutch drum for wear. Change if necessary.

•Check electrical wires and connections.

•Change the spark plug.

•Change the airfilter.

•Check and clean the muffler’s spark arrest screen if necessary (only mufflers with a catalytic converter).

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 114 00 325HDA55X-SERIESSymbols Symbol ExplanationContents Personal protective eqipment Safety InstructionsMachine’s protective equipment Muffler Vibration damping systemBlade guard Hand guard Blade guard 325HDA55 BladesGearbox Transport and storage General safety instructionsFuel safety StartProtective instructions while working Safety instructions when using the hedge trimmerPersonal protection Protective instructions regarding the surroundings325HDA55 Protective instructions when work is completedBasic working techniques Changing the hedge trimmer angle 325HE3, 325HE4What is what on the hedge trimmer? What is WHAT?Adjusting the harness 325HE4 AssemblyFitting the cutting attachment Fuel Fuel HandlingFuelling Stop Start and StopControl before starting Start and stopCarburettor MaintenanceHigh speed needle H Correctly adjusted carburettor Adjusting the idle speed, TCooling system MufflerSpark plug Lubrication Cleaning the air filterAir filter GearboxMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical Data325HDA55 325HE3 325HE4 Your Warranty Rights Obligations Emission Control Warranty Statement´+HÆe¶5d¨ Page 2001W10

325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 specifications

Husqvarna, a leading name in outdoor power equipment, offers a range of high-performance hedge trimmers designed to meet the needs of both professional landscapers and avid gardeners. Among their standout products are the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3. Each of these models is equipped with cutting-edge technology and exceptional features, making them suitable for a variety of trimming tasks.

The 325HDA55X-Series hedge trimmer is renowned for its robust performance and ergonomic design. It features a powerful X-Torq engine that reduces fuel consumption and emissions, promoting a more environmentally friendly operation. This model comes with a long, double-sided blade, ensuring efficient cutting of dense foliage with minimal effort. The low-vibration design minimizes operator fatigue, allowing for extended use without discomfort.

The 325HE3X-Series is another impressive offering by Husqvarna, particularly known for its versatility. This hedge trimmer includes an adjustable cutting head, allowing users to reach difficult angles and trim taller hedges with ease. With its lightweight construction, it is ideal for prolonged use, providing excellent maneuverability. The anti-vibration technology further enhances user comfort and control, making it suitable for both commercial and residential landscaping tasks.

Similarly, the 325HE4X-Series takes performance to the next level with its powerful engine and extended reach. Featuring a pole saw-like extension, it allows users to tackle high branches and tall hedges without the need for ladders. The efficient blade design ensures clean cuts, reducing the risk of plant damage. This model is particularly appreciated by professionals who require a tool that can efficiently handle larger pruning tasks.

Lastly, the 323HE3 hedge trimmer is designed for users seeking a lightweight, user-friendly option. It is equipped with a reliable engine that balances power, fuel efficiency, and durability. The compact design makes it easy to handle, even in tight spaces, while the double-sided blade allows for efficient vertical and horizontal trimming.

In conclusion, the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3 hedge trimmers showcase the company's commitment to innovation, comfort, and efficiency. With features like ergonomic designs, convenient reach adjustments, and advanced engine technology, these models cater to a wide range of trimming needs, making them essential tools for any landscaping professional or gardening enthusiast.
Top Page Image Contents