Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 Start and Stop, Start and stop

Page 14

START AND STOP

Control before starting

•Inspect the working area. Remove objects that can be thrown.

• Check the blades. Never use blades that are dull, cracked or damaged.

• Check that the hedge trimmer is in full working order. Check that all nuts and bolts are tightened correctly.

•Make sure the gearbox is lubricated correctly. See the section ”Lubricating the blades”.

•Ensure the blades always stop when the engine is idling.

•Only use the machine for what it is intended for.

•Ensure that the handle and safety functions are in order. Never use a machine that lacks a part or has been modified outside of the specifications.

Start and stop

Start

!WARNING!

The gearbox and clutch drum must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

Always move the hedge trimmer about 3 metres from the filling position before starting. Place the machine on a flat surface. Bear in mind that the blades start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unau- thorised persons are in the working area, otherwise there is a risk of serious personal injury.

Cold engine

IGNITION:

Set the stop switch to the start position.

CHOKE:

Set the choke control in the choke position (A).

The choke position is also the automatic start throttle position.

AIR PURGE:

Press the air purge dia- phragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Warm engine

IGNITION:

Set the stop switch to the start position.

CHOKE:

Set the choke control in the choke position and then back again to its original position (B)

In this way only the start throttle is applied with no choke.

AIR PURGE:

Press the air purge dia- phragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Press the machine body against the ground using your left hand (NOTE! Do not use your foot). Grip the starter handle with your right hand and slowly pull the starter cord out until you feel some resistance, (the starter hooks grip) now quickly and powerfully pull the cord. Immediately press the choke control in when the engine fires and repeat until the engine starts. When the engine starts, quickly apply full throttle and the start throttle will automatically disengage.

NOTE! Do not pull the starter cord out completely and do not release the starter cord from the fully extended position. This can damage the hedge trimmer.

Stop

The engine is stopped by switching the ignition off using the stop switch.

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 325HDA55X-SERIES 114 00Symbol Explanation SymbolsContents Machine’s protective equipment Safety InstructionsPersonal protective eqipment Blade guard Vibration damping systemMuffler Hand guard Gearbox BladesBlade guard 325HDA55 Start General safety instructionsFuel safety Transport and storageProtective instructions regarding the surroundings Safety instructions when using the hedge trimmerPersonal protection Protective instructions while workingChanging the hedge trimmer angle 325HE3, 325HE4 Protective instructions when work is completedBasic working techniques 325HDA55What is WHAT? What is what on the hedge trimmer?Fitting the cutting attachment AssemblyAdjusting the harness 325HE4 Fuelling Fuel HandlingFuel Start and stop Start and StopControl before starting StopMaintenance CarburettorAdjusting the idle speed, T High speed needle H Correctly adjusted carburettorSpark plug MufflerCooling system Gearbox Cleaning the air filterAir filter LubricationWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenance325HDA55 325HE3 325HE4 Technical DataTechnical data Emission Control Warranty Statement Your Warranty Rights Obligations´+HÆe¶5d¨ Page 2001W10

325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, 323HE3 specifications

Husqvarna, a leading name in outdoor power equipment, offers a range of high-performance hedge trimmers designed to meet the needs of both professional landscapers and avid gardeners. Among their standout products are the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3. Each of these models is equipped with cutting-edge technology and exceptional features, making them suitable for a variety of trimming tasks.

The 325HDA55X-Series hedge trimmer is renowned for its robust performance and ergonomic design. It features a powerful X-Torq engine that reduces fuel consumption and emissions, promoting a more environmentally friendly operation. This model comes with a long, double-sided blade, ensuring efficient cutting of dense foliage with minimal effort. The low-vibration design minimizes operator fatigue, allowing for extended use without discomfort.

The 325HE3X-Series is another impressive offering by Husqvarna, particularly known for its versatility. This hedge trimmer includes an adjustable cutting head, allowing users to reach difficult angles and trim taller hedges with ease. With its lightweight construction, it is ideal for prolonged use, providing excellent maneuverability. The anti-vibration technology further enhances user comfort and control, making it suitable for both commercial and residential landscaping tasks.

Similarly, the 325HE4X-Series takes performance to the next level with its powerful engine and extended reach. Featuring a pole saw-like extension, it allows users to tackle high branches and tall hedges without the need for ladders. The efficient blade design ensures clean cuts, reducing the risk of plant damage. This model is particularly appreciated by professionals who require a tool that can efficiently handle larger pruning tasks.

Lastly, the 323HE3 hedge trimmer is designed for users seeking a lightweight, user-friendly option. It is equipped with a reliable engine that balances power, fuel efficiency, and durability. The compact design makes it easy to handle, even in tight spaces, while the double-sided blade allows for efficient vertical and horizontal trimming.

In conclusion, the Husqvarna 325HDA55X-Series, 325HE3X-Series, 325HE4X-Series, and 323HE3 hedge trimmers showcase the company's commitment to innovation, comfort, and efficiency. With features like ergonomic designs, convenient reach adjustments, and advanced engine technology, these models cater to a wide range of trimming needs, making them essential tools for any landscaping professional or gardening enthusiast.
Top Page Image Contents