Husqvarna 324LD manual Fitting the trimmer head, Fitting other guards and cutting attachments

Page 13

ASSEMBLY

Fitting the trimmer head

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft. Ensure that the drive discs guide locates correctly in the covers centre hole.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible.

To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

•To dismantle, follow the instructions in the reverse order.

Fitting other guards and cutting attachments

•Fit the correct trimmer guard (A) for use with the trimmer head.

Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.

H

H

•To dismantle, follow the instructions in the reverse order.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents English 324LX-series 324LDX-seriesSymbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsPersonal protective equipment Muffler Vibration damping systemCutting equipment Locking nutNever use a machine that has a faulty muffler Trimmer head Cutting equipmentFuel safety General safety precautionsStarting Transport and storageGrass trimming using a trimmer head and plastic blades Basic safety rulesGeneral working instructions Basic working techniquesCutting What is what? What is WHAT?Assembly AssemblyFitting the loop handle Assembling and dismantling the two-piece shaftFitting other guards and cutting attachments Fitting the trimmer headFitting a trimmer guard and Superauto II 1 trimmer head Fuel Fuel HandlingCheck before starting Starting and StoppingStarting and stopping Cold engineStopping Carburetor MaintenanceMuffler Cooling systemSpark plug Cleaning the air filterTwo-piece shaft Air filterDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataAttachments Art No Use with Your Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page S35 ´z+H?¶5ƨ T35 1140315-95 ´z+H?¶5ƨ ´z+H?¶5ƨ

324L, 324LD specifications

The Husqvarna 324L and 324LD are powerful and versatile string trimmers designed to meet the demands of both professional landscapers and homeowners. These models stand out in the market due to their robust design, exceptional performance, and user-friendly features.

One of the key characteristics of the Husqvarna 324L and 324LD is their high-performance engine. Both models are powered by a 25cc X-Torq engine that delivers excellent cutting power while minimizing fuel consumption and emissions. This advanced technology not only helps in maintaining a clean environment but also enables users to operate the machine for extended periods without frequent refueling.

The ergonomic design of the trimmers enhances user comfort, conferring reduced strain during operation. The adjustable loop handle is designed to provide a comfortable grip for optimal control, allowing users to maneuver easily around various landscapes. Moreover, the lightweight construction further contributes to ease of use, making it suitable for long hours of work without causing fatigue.

Another notable feature of the Husqvarna 324L and 324LD is the automatic line feed system. The Tap 'N Go functionality allows users to easily advance the cutting line by simply tapping the trimmer head on the ground, ensuring continuous operation without interruptions. This feature saves time and ensures that users can maintain focus on their trimming tasks.

For added versatility, the 324LD model is equipped with a detachable shaft that allows users to switch attachments quickly. This makes it compatible with various tools, such as edgers, hedge trimmers, and blowers, transforming a single machine into a multi-functional landscaping tool. It caters to different needs, from trimming grass to tackling overgrown weeds.

Additionally, both models feature a semi-automatic choke, which simplifies starting the engine, ensuring reliable ignition even in challenging conditions. The efficient air filter reduces maintenance frequency, prolonging the lifespan of the engine while maintaining optimal performance.

In summary, the Husqvarna 324L and 324LD string trimmers are equipped with advanced technologies and features that enhance user experience and efficiency. Their powerful engines, ergonomic design, and versatile attachments make these models an excellent choice for anyone looking to achieve a professional finish in their landscaping projects. Whether for commercial use or residential upkeep, the Husqvarna 324 series offers unmatched reliability and performance.
Top Page Image Contents