Husqvarna 324LD manual General safety precautions, Fuel safety, Starting, Transport and storage

Page 8

SAFETY INSTRUCTIONS

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

General safety precautions

IMPORTANT!

The machine is only designed for trimming grass.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Never use the machine in extreme weather conditions such as severe cold, very hot and/or humid climates.

Never use a machine that has been modified in any way from its original specification.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

WARNING! A faulty cutting attachment may

!increase the risk of accidents.

Starting

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

The complete clutch cover and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

8 – English

Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

Never wrap the starter cord around your hand

Fuel safety

Always use a fuel container with an anti-spill valve.

Never refuel the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

Always ensure there is adequate ventilation when handling fuel.

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

4Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

Transport and storage

Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

When storing and transporting fuel always use approved containers intended for this purpose.

Image 8
Contents 324LX-series 324LDX-series EnglishKEY to Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Vibration damping system MufflerCutting equipment Locking nutNever use a machine that has a faulty muffler Cutting equipment Trimmer headGeneral safety precautions Fuel safetyStarting Transport and storageBasic safety rules Grass trimming using a trimmer head and plastic bladesGeneral working instructions Basic working techniquesCutting What is WHAT? What is what?Assembly AssemblyFitting the loop handle Assembling and dismantling the two-piece shaftFitting a trimmer guard and Superauto II 1 trimmer head Fitting the trimmer headFitting other guards and cutting attachments Fuel Handling FuelStarting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburetorMuffler Cooling systemCleaning the air filter Spark plugTwo-piece shaft Air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataAttachments Art No Use with Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page S35 ´z+H?¶5ƨ T35 1140315-95 ´z+H?¶5ƨ ´z+H?¶5ƨ

324L, 324LD specifications

The Husqvarna 324L and 324LD are powerful and versatile string trimmers designed to meet the demands of both professional landscapers and homeowners. These models stand out in the market due to their robust design, exceptional performance, and user-friendly features.

One of the key characteristics of the Husqvarna 324L and 324LD is their high-performance engine. Both models are powered by a 25cc X-Torq engine that delivers excellent cutting power while minimizing fuel consumption and emissions. This advanced technology not only helps in maintaining a clean environment but also enables users to operate the machine for extended periods without frequent refueling.

The ergonomic design of the trimmers enhances user comfort, conferring reduced strain during operation. The adjustable loop handle is designed to provide a comfortable grip for optimal control, allowing users to maneuver easily around various landscapes. Moreover, the lightweight construction further contributes to ease of use, making it suitable for long hours of work without causing fatigue.

Another notable feature of the Husqvarna 324L and 324LD is the automatic line feed system. The Tap 'N Go functionality allows users to easily advance the cutting line by simply tapping the trimmer head on the ground, ensuring continuous operation without interruptions. This feature saves time and ensures that users can maintain focus on their trimming tasks.

For added versatility, the 324LD model is equipped with a detachable shaft that allows users to switch attachments quickly. This makes it compatible with various tools, such as edgers, hedge trimmers, and blowers, transforming a single machine into a multi-functional landscaping tool. It caters to different needs, from trimming grass to tackling overgrown weeds.

Additionally, both models feature a semi-automatic choke, which simplifies starting the engine, ensuring reliable ignition even in challenging conditions. The efficient air filter reduces maintenance frequency, prolonging the lifespan of the engine while maintaining optimal performance.

In summary, the Husqvarna 324L and 324LD string trimmers are equipped with advanced technologies and features that enhance user experience and efficiency. Their powerful engines, ergonomic design, and versatile attachments make these models an excellent choice for anyone looking to achieve a professional finish in their landscaping projects. Whether for commercial use or residential upkeep, the Husqvarna 324 series offers unmatched reliability and performance.