Husqvarna 324L Starting and Stopping, Check before starting, Starting and stopping, Cold engine

Page 15

STARTING AND STOPPING

Check before starting

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

Starting and stopping

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Cold engine

Ignition: Set the stop switch to the start position.

Choke: Set the choke control in the choke position.

Primer bulb: Press the primer bulb repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

O

I

L

Warm engine

Ignition: Set the stop switch to the start position.

Choke: Put the choke in working position.

Primer bulb: Press the primer bulb repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

O

I

L

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents English 324LX-series 324LDX-seriesSymbols KEY to SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting equipmentNever use a machine that has a faulty muffler Trimmer head Cutting equipmentTransport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass trimming using a trimmer head and plastic blades General working instructionsCutting What is what? What is WHAT?Assembling and dismantling the two-piece shaft AssemblyAssembly Fitting the loop handleFitting the trimmer head Fitting other guards and cutting attachmentsFitting a trimmer guard and Superauto II 1 trimmer head Fuel Fuel HandlingCold engine Starting and StoppingCheck before starting Starting and stoppingStopping Cooling system MaintenanceCarburetor MufflerAir filter Cleaning the air filterSpark plug Two-piece shaftMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataAttachments Art No Use with Your Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page S35 ´z+H?¶5ƨ T35 1140315-95 ´z+H?¶5ƨ ´z+H?¶5ƨ

324L, 324LD specifications

The Husqvarna 324L and 324LD are powerful and versatile string trimmers designed to meet the demands of both professional landscapers and homeowners. These models stand out in the market due to their robust design, exceptional performance, and user-friendly features.

One of the key characteristics of the Husqvarna 324L and 324LD is their high-performance engine. Both models are powered by a 25cc X-Torq engine that delivers excellent cutting power while minimizing fuel consumption and emissions. This advanced technology not only helps in maintaining a clean environment but also enables users to operate the machine for extended periods without frequent refueling.

The ergonomic design of the trimmers enhances user comfort, conferring reduced strain during operation. The adjustable loop handle is designed to provide a comfortable grip for optimal control, allowing users to maneuver easily around various landscapes. Moreover, the lightweight construction further contributes to ease of use, making it suitable for long hours of work without causing fatigue.

Another notable feature of the Husqvarna 324L and 324LD is the automatic line feed system. The Tap 'N Go functionality allows users to easily advance the cutting line by simply tapping the trimmer head on the ground, ensuring continuous operation without interruptions. This feature saves time and ensures that users can maintain focus on their trimming tasks.

For added versatility, the 324LD model is equipped with a detachable shaft that allows users to switch attachments quickly. This makes it compatible with various tools, such as edgers, hedge trimmers, and blowers, transforming a single machine into a multi-functional landscaping tool. It caters to different needs, from trimming grass to tackling overgrown weeds.

Additionally, both models feature a semi-automatic choke, which simplifies starting the engine, ensuring reliable ignition even in challenging conditions. The efficient air filter reduces maintenance frequency, prolonging the lifespan of the engine while maintaining optimal performance.

In summary, the Husqvarna 324L and 324LD string trimmers are equipped with advanced technologies and features that enhance user experience and efficiency. Their powerful engines, ergonomic design, and versatile attachments make these models an excellent choice for anyone looking to achieve a professional finish in their landscaping projects. Whether for commercial use or residential upkeep, the Husqvarna 324 series offers unmatched reliability and performance.
Top Page Image Contents