Husqvarna 324LD manual Fuel Handling

Page 14

FUEL HANDLING

Fuel

CAUTION! The machine is equipped with a four-stroke engine. Make sure that there is always sufficient oil in the oil tank.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

The catalytic converter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

Gasoline

•Use high-grade unleaded petrol of at least 86 octane.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

Engine oil

Check the oil level before starting the machine. A too low oil level can cause serious damage to the engine.

When the machine is new the engine oil should be changed after the first month or after 10 hours of operation.

•For the best result and function use HUSQVARNA engin oil.

•When HUSQVARNA engine oil is not available another high grade engine oil can be used. Contact your dealer when selecting oil. Mineral oil or semisynthetic oil should be used. In general SAE 10W-40 is recommended.

•Never use oil intended for two-stroke engines.

Oil level

The machine must be switched off and placed on a flat surface when you check the oil level.

Unscrew the oil cap, clean the dipstick located on the cap and insert the cap again without screwing it down. Check the oil level on the dipstick.

When the oil level is low, top up using engine oil to the edge of the oil refill hole.

Only use recommended engine oil.

Fueling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean around the fuel cap. Clean the fuel and oil tank regularly. The fuel filter should be changed at least once a year. Contamination in the tanks causes malfunction.

Always move the machine about 3 metres from the refuelling position before starting.

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 324LX-series 324LDX-series EnglishKEY to Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Cutting equipment Vibration damping systemMuffler Locking nutNever use a machine that has a faulty muffler Cutting equipment Trimmer headStarting General safety precautionsFuel safety Transport and storageGeneral working instructions Basic safety rulesGrass trimming using a trimmer head and plastic blades Basic working techniquesCutting What is WHAT? What is what?Fitting the loop handle AssemblyAssembly Assembling and dismantling the two-piece shaftFitting a trimmer guard and Superauto II 1 trimmer head Fitting the trimmer headFitting other guards and cutting attachments Fuel Handling FuelStarting and stopping Starting and StoppingCheck before starting Cold engineStopping Muffler MaintenanceCarburetor Cooling systemTwo-piece shaft Cleaning the air filterSpark plug Air filterWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical dataAttachments Art No Use with Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page S35 ´z+H?¶5ƨ T35 1140315-95 ´z+H?¶5ƨ ´z+H?¶5ƨ

324L, 324LD specifications

The Husqvarna 324L and 324LD are powerful and versatile string trimmers designed to meet the demands of both professional landscapers and homeowners. These models stand out in the market due to their robust design, exceptional performance, and user-friendly features.

One of the key characteristics of the Husqvarna 324L and 324LD is their high-performance engine. Both models are powered by a 25cc X-Torq engine that delivers excellent cutting power while minimizing fuel consumption and emissions. This advanced technology not only helps in maintaining a clean environment but also enables users to operate the machine for extended periods without frequent refueling.

The ergonomic design of the trimmers enhances user comfort, conferring reduced strain during operation. The adjustable loop handle is designed to provide a comfortable grip for optimal control, allowing users to maneuver easily around various landscapes. Moreover, the lightweight construction further contributes to ease of use, making it suitable for long hours of work without causing fatigue.

Another notable feature of the Husqvarna 324L and 324LD is the automatic line feed system. The Tap 'N Go functionality allows users to easily advance the cutting line by simply tapping the trimmer head on the ground, ensuring continuous operation without interruptions. This feature saves time and ensures that users can maintain focus on their trimming tasks.

For added versatility, the 324LD model is equipped with a detachable shaft that allows users to switch attachments quickly. This makes it compatible with various tools, such as edgers, hedge trimmers, and blowers, transforming a single machine into a multi-functional landscaping tool. It caters to different needs, from trimming grass to tackling overgrown weeds.

Additionally, both models feature a semi-automatic choke, which simplifies starting the engine, ensuring reliable ignition even in challenging conditions. The efficient air filter reduces maintenance frequency, prolonging the lifespan of the engine while maintaining optimal performance.

In summary, the Husqvarna 324L and 324LD string trimmers are equipped with advanced technologies and features that enhance user experience and efficiency. Their powerful engines, ergonomic design, and versatile attachments make these models an excellent choice for anyone looking to achieve a professional finish in their landscaping projects. Whether for commercial use or residential upkeep, the Husqvarna 324 series offers unmatched reliability and performance.
Top Page Image Contents