Final setting of the idling speed T

MAINTENANCE

Adjust the idling speed with the screw T, if it is necessary to readjust. First turn the idle speed adjusting screw T clockwise until the cutting attachment starts to rotate/ move.

Then turn, counter-clockwise until the cutting attachment stops. A correctly adjusted idle speed setting occurs when the engine runs smoothly in every position. It should also be good margin to the rpm when the cutting attachment starts to rotate/move.

CAUTION! Contact your servicing dealer, if the idle speed setting cannot be adjusted so that the cutting attachment stops. Do not use the machine until it has been properly adjusted or repaired.

High speed needle H

Correctly adjusted carburetor

A correctly adjusted carburetor means that the machine accelerates without hesitation and the machine 4-cycles a little at max speed. Furthermore, the cutting attachment must not rotate/move at idling. A too lean adjusted low speed needle L may cause starting difficulties and bad acceleration.

A too lean adjusted high speed needle H gives lower power = less capacity, bad acceleration and/or damage to the engine. A too rich adjustment of the two speed needles L and H gives acceleration problems or too low working speed.

The high speed needle H influences the power, speed, temperature and fuel con- sumption of the machine. A too lean adjusted high speed needle H (high speed needle H closed too much) gives overrevs and damages the engine. Do not let the machine run at full speed for more than 10 seconds.

Turn the high speed needle very slowly clockwise until engine speed is reduced. Thereafter turn the high speed needle very slowly counter- clockwise and stop when the engine begins to run roughly. Then turn the high speed needle slowly the minimum amount clockwise until the engine runs smoothly.

The high speed needle H is correctly set when the machine ”4-cycles” a little. If the ma- chine ”whistles” the setting is too lean. If there is too much smoky exhaust gas at the same time as the machine ”4- cycles” much, the setting is too rich.

NOTE! For optimum setting of the carburetor, contact a qualified servicing dealer who has a revolution counter at his disposal.

English – 17

323E, 325E specifications

The Husqvarna 323E and 325E models represent a significant advancement in the world of outdoor power equipment, specifically designed for pruning and trimming tasks. These lightweight and versatile brush saws are engineered for both professional landscapers and avid gardeners, offering a perfect blend of power, efficiency, and user-friendly design.

One of the main features of the Husqvarna 323E is its low weight, which makes it easy to handle and maneuver during extended use. Weighing in at just over 5 kg (12 lbs), it reduces user fatigue, allowing for long hours of operation without strain. Similarly, the 325E boasts a slightly higher power output while still remaining lightweight, striking an optimal balance between mobility and performance.

Both models are equipped with Husqvarna's innovative X-Torq engine technology, which provides increased power output while reducing fuel consumption and harmful emissions. This makes the 323E and 325E not only efficient machines but also environmentally friendly options for users who prioritize sustainability. The X-Torq engine delivers high torque over a wide RPM range, giving users the ability to tackle tough tasks with ease.

The ergonomic design of these models makes them comfortable to use for extended periods. They feature adjustable handlebars and an anti-vibration system that minimizes fatigue, allowing users to maintain a steady grip and control. The easy-to-use controls further enhance the user experience, enabling operators to focus on the task at hand without unnecessary distractions.

In terms of versatility, the Husqvarna 323E and 325E are compatible with a range of attachments, making them suitable for various applications, from tree care to light brush clearing. This adaptability ensures that users can utilize these tools for a multitude of tasks, maximizing their investment.

In summary, the Husqvarna 323E and 325E brush saws combine lightweight construction with powerful performance and advanced technology. Features like the X-Torq engine, ergonomic design, and versatility make them ideal choices for professionals and enthusiasts alike. With these models, Husqvarna continues to deliver reliable and efficient outdoor equipment tailored to meet the diverse needs of users.