Fuel Handling, Fuel mixture, Fuelling

FUEL HANDLING

Fuel mixture

NOTE!

The edger is fitted with two-stroke engines and must always be run on a mixture of gasoline and two-stroke oil. To ensure the correct mixture proportions it is important to measure the quantity of oil accurately. When mixing small amounts of fuel small discrepancies in the amount of oil has a great bearing on the proportions of the fuel mixture.

!WARNING!

Always provide good ventilation when han- dling fuel.

Gasoline

NOTE!

Always use high grade unleaded oil mixed gasoline (minimum 87 RON). Leaded fuel will destroy the catalytic converter and it will no longer serve its purpose.

• This engine is certified to operate on unleaded gasoline.

•The lowest recommended octane rating is 87. If you run the engine on lower octane rating than 87 so-called

“knocking“ can occur. This leads to an increased engine temperature, which can result in a serious engine breakdown.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

• For the best results use HUSQVARNA two-stroke oil, which has been specially developed for two-stroke engines.

Mixing ratio 1:50 (2%).

• Never use two-stroke oil intended for water cooled outboard motors, so-called outboard motor oil.

•Never use oil intended of four-stroke engines.

Mixture

•Always mix gasoline and oil in a clean container intended for fuel.

•Always start by filling half the quantity of gasoline required. Then add the entire oil quantity. Mix (shake) the fuel mixture. Fill the remaining quantity of gasoline.

•Mix (shake) the fuel mixture carefully before filling in the machine‘s fuel tank.

•Do not mix more than max. one month’s supply of fuel.

•If the clearing saw is not used for a long period of time, the fuel tank should be emptied and cleaned.

•This engine is certified to operate on unleaded gasoline.

!WARNING!

The catalytic converter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when handling the saw near flammable substances or vapours.

Fuelling

!WARNING!

The following precautions reduce the risk of fire:

Do not smoke or place any sources of heat in the vicinity of the fuel. Never refuel when the engine is running. Always stop the engine and let it cool for a few minutes before refuelling. Open the fuel cap slowly when fuelling so that any over pressure is released slowly. Tighten the fuel cap carefully after refuelling. Always move the machine from the fuelling place before starting.

•Clean around the fuel

cap. Contamination in the tank can disrupt operations.

• Ensure that the fuel is well mixed by shaking the container before filling the tank.

Gasoline	Oil
	2%(1:50)

Lit.	Lit.
5	0,10
10	0,20
15	0,30
20	0,40
US	US
gallon	fl. oz.
1	2 1/2
2 1/2	6 1/2

512 7/8

14 – English

323E, 325E specifications

The Husqvarna 323E and 325E models represent a significant advancement in the world of outdoor power equipment, specifically designed for pruning and trimming tasks. These lightweight and versatile brush saws are engineered for both professional landscapers and avid gardeners, offering a perfect blend of power, efficiency, and user-friendly design.

One of the main features of the Husqvarna 323E is its low weight, which makes it easy to handle and maneuver during extended use. Weighing in at just over 5 kg (12 lbs), it reduces user fatigue, allowing for long hours of operation without strain. Similarly, the 325E boasts a slightly higher power output while still remaining lightweight, striking an optimal balance between mobility and performance.

Both models are equipped with Husqvarna's innovative X-Torq engine technology, which provides increased power output while reducing fuel consumption and harmful emissions. This makes the 323E and 325E not only efficient machines but also environmentally friendly options for users who prioritize sustainability. The X-Torq engine delivers high torque over a wide RPM range, giving users the ability to tackle tough tasks with ease.

The ergonomic design of these models makes them comfortable to use for extended periods. They feature adjustable handlebars and an anti-vibration system that minimizes fatigue, allowing users to maintain a steady grip and control. The easy-to-use controls further enhance the user experience, enabling operators to focus on the task at hand without unnecessary distractions.

In terms of versatility, the Husqvarna 323E and 325E are compatible with a range of attachments, making them suitable for various applications, from tree care to light brush clearing. This adaptability ensures that users can utilize these tools for a multitude of tasks, maximizing their investment.

In summary, the Husqvarna 323E and 325E brush saws combine lightweight construction with powerful performance and advanced technology. Features like the X-Torq engine, ergonomic design, and versatility make them ideal choices for professionals and enthusiasts alike. With these models, Husqvarna continues to deliver reliable and efficient outdoor equipment tailored to meet the diverse needs of users.